User's Manual

ManualsBrandsCOMMAX ManualsElectronicsDigital Door Lock

Table Of Contents

Exterior Unit : Identified by the keypad screen, installed on the outer part of door

Interior : Identified with the battery cover, installed on the interior part of door Unit

Number Pad : Displays numbers for password entry and recognizes compatible RFID objects

Emergency Power Contact : Power can be supplied from the outside using a 9 Volt battery

Registration [R]Button : This button allows you to access all the functions and settings for this door lock

Thumb-Turn :You can manually unlock and lock your deadbolt using the turn lever

Lock Button : Used for locking when in “Manual Lock Mode” and also used for the “Double Lock” feature

Magnetic Sensor : This sensor allows the doorlock to know when the door is closed so that it can automatically lock

Z-Wave Pack : Sold separately. This module allows the doorlock to have Bluetooth

Battery Cover : Battery cover of interior unit

Battery : 4 pcs of AA 1.5V LR6 Alkaline Battery

Interior Plate : This plate is used to hold the exterior panel onto the door. It is also used to connect the

interior panel to the door

Card : ISO14443A-Part3 RFID Card

M4X40mm Screw (3EA) : These screws are used to hold the exterior panel to the “Interior Plate”

M4X6mm Screw (3EA) : These screws are used to hold the Interior Unit to the “Interior Plate”

4X20mm Screw Tapping (2EA) : Used to securely attach the magnetic sensor to the door frame

Magnet : Do not misplace! This piece is crucial for your automatic locking function. Losing it may also

cause other malfunctions.

User Manual : Instruction for users

Install Guide : Instruction for installation

Tag Key Card

Packa

ge Contents

CAUTION

Exterior Unit

Thumb-Turn

Batteries

Spring

Tag Key Card

[4EA]

Interior Plate

with back pad

Z-wave Pack

Magnetic Sensor

Adapter [+]

Magnet

User Manual

Install Guide

M4x6 [3EA]

4x20

[2EA]

Tapping

M4x40 [3EA]

Delete Individual Registered Card

NFC

Tag Key Card

Registration Authentication Mode Off

Interior Unit

Batteries

Battery Cover

Registration

[R ]Button

Lock Button

Z-wave Pack

+ +

Registering Smartphone NFC Card [Only available with BLE models]

Opening the Door with a Smartphone NFC Card

Delete all Registered Cards

NFC

Double Authentication Mode Setting(On) [Passcode and Card must be registered]

Registration Authentication Mode Setting (On)

Double Authentication Mode Off

Automatic Re- Lock Feature

Tag Key Card

Opening the Door with a Passcode

Enter the new

Passcode

[4~10 digits]

Auto Lock Feature

CAUTION

Registering Master Passcode [4~10 Digits / Default: 1234]

Beep

Beep-Beeri

Beep-Beeri-Beepbeep

Beeri

Beep-Tiri

Beep

Beep-tiririring

Tiririring

Beep-Beeri

Beep

Auto Lock Setting

Reference: Anti-Peek Feature

Manual Lock Setting

Package Contents

The setting and operation of each function may not be able to be implemented due to

the loss of function (malfunction), natural disaster, arbitrary change, etc.depending on the

installation environment and frequency of use.

Please read User Manual and Install Guide before using the product

Please be careful with personal information by using BLE and Z-wave settings

WARNING

CDL-107U

USER MANUAL

WWW.COMMAX.CO.KR

Please observe the following precautions in order to avoid injury or damage to property

Do not install outdoors in the rain

Do not disassemble or reassemble it as it may cause malfunction.

Do not use any tools to subject the product to excessive force

Your password and card should be managed carefully

Please make sure that the door is properly locked when you leave

Do not spray directly with water or clean it with chemicals such as benzene, thinner, or alcohol

Be sure the door is open when you first register or change the passcode

as the door may accidentally lock during the process.

Please change your passcode regularly and re-register your passcode

immediately if you think someone else has gained access to it.

If you lose any of the registered cards, please delete all registered cards immediately.

Press the [R]

button briefly

Press the [R]

button briefly

Press the [R]

button briefly

Press the [8] button

briefly

Press the [7]

button briefly

Press the [5]

button briefly

Press the [5]

button briefly

Press the [6]

button briefly

Press the [6]

button briefly

Press the [4]

button briefly

Press the [R] button

for 3 seconds

Press the [R] button

for 3 seconds

Press the [R] button

for 3 seconds

Press the [R] button

for 3 seconds

Press the [R] button

for 3 seconds

Press the [R] button

for 3 seconds

Press the [R] button

for 3 seconds

Press the [R] button

for 3 seconds

Press the [R]

button briefly

Press the [R]

button briefly

Press the [R]

button briefly

Press the [R]

button briefly

Press the [R]

button briefly

Press the [R]

button briefly

Press the [R]

button briefly

Press the [R]

button briefly

Press the [R] button

briefly

Press the [R]

button briefly

Press the [ ] button

and re-enter the

Passcode

Beeri

Beeririri

If you register a new passcode, the existing registered passcode will be automatically changed

Beeririring

BeeringBeering

Touch the

Number Pad

Touch the

Number Pad

Enter the Passcode

then press the [ ] button

After unlock the deadbolt

then open the door

If you are concerned about passcode exposure, you may enter a random number

before entering your passcode.[up to 20 digits included passcode]

i.e) (up to 16 random digits) + (your passcode: 1234 [ ])

In order to use OTP, BLE Pack must be installed to enable unlock on OTP .

Please refer to enclosed BLE registration and user manual

You should contact an authorized locksmith or other security specialist to reduce the risk

of intrusion from damage caused by force or technical means and to enhance security.

No door lock can guarantee its own security or safety by itself.

Thank you for purchasing CDL-107U

This manual is designed to make the product more convenient and safe to use.

Please read it carefully before using this product.

Up to 30 RFID user cards can be registered including smartphone NFC.

The same card will not be registered twice during registration.

Beeringbeering Beeringbeering

Touch the Card

reader with the

Card to register

When the 2580 flashes,

the next card to be

registered is touched

continuously

Touch the Card reader with a registered Card

After unlock the deadbolt

then open the door

After unlock the deadbolt

then open the door

If the card surface is metallic, the recognition rate may be significantly degraded

or not recognized.

The card may not be recognized depending on the smartphone attachment.

When using Sticker Type Card, you need to turn off NFC function on the smartphone.

Beeririri

Press the [#]

button once

Press the [#]

button once

Press the [#] button

for 5 seconds

When the 2580 flashes,

Touch the Card reader

with Smartphone NFC

When the 2580 flashes,

Touch the Card reader

with Smartphone NFC

To use smartphone nfc feature, install the BLE app, enable nfc mode, wake up your smartphone and use it.

Please delete and re-register your cards if you lost a/any RFID Card(s) for security purposes.

Touch the card reader

with the RFID Card or

NFC card to delete

Please keep your passcode and card registration safe.

If the registered passcode or card is deleted or not recognized,

it is recommended to register or reset immediately.

the magnetic sensor does not sound when the door is closed, the door does not lock.

In order to lock the door, touch the number plate for 2 seconds or thumb-turn to lock

the door when closing the door.

The door lock sensor may not operate due to malfunction of the magnet sensor.

Be sure the door is locked when the door is closed.

If you keep the door unlocked after setting the auto lock, the door unlock beeps twice

Door open state

[Distance between

the sensor and the magnet]

When door closed,the sensor recognizes

the magnet and automatically locks

in 2 seconds.

If you do not open the door after unlocking it with

a passcode or card, the door locks automatically

after 7 seconds.

After double authentication mode is set up, enter the password first and then touch

the card to unlock the door.

If registration authentication mode is set up, you will hear 2 beep sounds when you

press the [R] button.

Enter the Master

Passcode then press

the [ ] button

If you turn off registration authentication mode, registered guest passcode will be

automatically deleted.

[When the registration authentication mode is on]

The guest passcode function is activated and the double lock mode is automatically off

Press the [R] button first, then enter the passcode and touch [ ] key

to enter registration mode

As with any radio-based technology, it should be noted that the accuracy and reliability

of the COMMAX lock's in-and outside sensor cannot be guaranteed. Users should not

rely solely on the COMMAX lock's sensor for security purposes and should always use

caution. This manufacturer assumes no responsibility for incorrect results or damages

resulting from the use of the COMMAX lock's sensor. Certain home configurations may

impede the COMMAX lock's sensor more than others.

Emergency

Teminal

Care Reader

Low Voltage

Indicator LED

Reset Switch

Number Plate

Door Status

(Door Open)

Door Status

(Door Close)

WARNING

CDL-107U

USER MANUAL

WWW.COMMAX.CO.KR

You should contact an authorized locksmith or other security specialist to reduce the risk

of intrusion from damage caused by force or technical means and to enhance security.

No door lock can guarantee its own security or safety by itself.

Thank you for purchasing CDL-107U

This manual is designed to make the product more convenient and safe to use.

Please read it carefully before using this product.

Registering a RFID Card or Key Tag

Opening the Door with a RFID Card or Key Tag

If the card isn’t registered, Double authentication mode is not set up.

If you delete registered card, Double Authentication mode is set off

M5x75 [ 2EA ]

M4x30 [ 4EA ]

Mechanical key

Quick Manual

M4x70 [ 2EA ]

MORTISE

STRIKER

Summary of content (2 pages)

PAGE 1
Auto Lock Setting CAUTION Beep-Tiri Be sure the door is open when you first register or change the passcode as the door may accidentally lock during the process. Please change your passcode regularly and re-register your passcode immediately if you think someone else has gained access to it. If you lose any of the registered cards, please delete all registered cards immediately.
PAGE 2
Registering Guest Passcode [Maximum10 Guests] Beep-Beebi Beeri Soft Reset [All settings are reset except BLE & Z-Wave] High Temperature Alarm If an alarm occurs during an internal fire or a high temperature, the door will automatically unlock. The alarm sounds for 3 minutes continuously. [Inside temperature : 158 F Temperature may vary depending on installation environment It will be off when it is authenticated by registered passcode or cards. It will be off when the battery is removed.