User's Manual

Emergency Alarm Function
Heat Warning
When a fire is detected, a high temperature of
about suspected (62
Ⳅ
± 5
Ⳅ
), automatically
releases the locked state with strong beeps for
safety.
Heat Warning
Warning mischief and 1 minute stop function
Abnormally in the door is locked
(For example: forcely open the gate) occurs when
the door open condition is detected
Beep noise makes 80 db (db) beeper.
If input not registered [password] or [Smart Key repeatedly entered
five times l stop operating 1 minutes with alarm.
Remove battery or input [password] or attach [smart key] , it will be turn off warning and alarm.
When high temperrature status, it will be not turn off status. please cool down temperature.
In case of inside body recieve sunlight, it will be warning and alarm.
so, dual authentication will be turn off automatically
Turn off alarm
Mistake input
5 times??
Turn off heat warning & Intruder alarm
Caution
Digital Door Lock COMMAX
Usage
Deadbolt(mortise)error alarm
Battery Replacement Warning
Opened or locked, when the dead
bolt (square clamp) of the indoor
unit body is normally taken out, or
do not enter "beep, beep beep,
beep" warning sound occurs three
times.
Battery icon light on the Keypad or make sound "bleek bleek
bleek", please change battery. all battery change required.
Deadbolt
(Mortise)
“BBBB”
“Bleek
Bleek
Bleek.”
Caution
Caution
Caution
If sound alarm countinuos or not workging properly. it required reallocation door lock
position, please contact installer or door lock professional company.
Do not use mixed with used battery and New battery , Please change all battery
to new ones.
Wireless module use battery consumption, Battery recycle will be more
shorthen.
www.commax.com
DDL 영문 사용설명서.indd 21 2016. 5. 2. 오후 3:44