User's Manual

Emergency Alarm Function
Emergency Power
Emergency Key (Key Type)
Note
Note
Batteyr gone, impossible open the door status.
Not open the door properly status.
Buy
9V Battery.
Check handle
emergency key
hole outside.
Emergency Key
input Key hole
and turn left
and right.
‘Tak’click sound
and turn to
center,
Deadbolt will
be unlock.
Drag the handle
and door will be
open.
Take Emgergency
key this kind of
upper direction.
9v battery
attach
Emergency
Power supply
terminal.
Press the
[ ]button.
Input
[Password].
Push the [ ]
Button again
and it beep and
unlock.
Digital Door Lock COMMAX
Break down cause and solution
If the product does not operate normally, check the following check point first.
Usage
Problem Solution Remarks
No Power
No Change Password
Password / Smart key
authentication success
but no open the door
keep going alarm
“Beleek x3 ”
warning sound.
No enter
Auto Locking
No open the door
though push the
[ ]button
- Please check battery status bad or gone power and
check battery input direction
- please change new 4 alkaline Battery.
- Please input password short “Beep”sound one by one.
- Again password register / repeat input.
8 Page
8 Page
22 Page
21 Page
16 Page
- Please try 9V emergency power(square type)
- Lock can may broken. please contact installer.
- Please reset automode.
- Sound occurs the batteries discharge and does
not work. please change all new battery
- Beep indicating the battery replaced.
if you heard this alarm, please replace all new
4pcs battery.
- please check passwor input correctly
- When input password, keypad light off, it will be not
change password , presss the [ ]button and check
keypad light on, input password again.
(if didnot input password within 7sec, it will be canceled.)
www.commax.com
DDL 영문 사용설명서.indd 23 2016. 5. 2. 오후 3:44