CDT-180 COLOR DECT .in.ua www.commax.in.
Quick guide !"Switch Handset On / Off Press END key !"Keypad Lock Press # key !"Unlock the Keypad Press 1 and then 9 key !"Making an External Call Enter the number, then press TALK key !"Answering a Call Press any key except END key !"Muting the ringing during an Incoming Call Press Mute key !"Redialing a Number Press Redial key and then find the redial number using UP / DOWN key and then press TALK key !"Dialing using Phonebook Press DOWN key, and select entry with number key (if necessary,
Safety Precautions !" For the Handset charging, use only approved rechargeable batteries (Battery 1.2V 600mAh Ni-MH AAA size). Never use other batteries or conventional alkaline batteries. They could lead a short circuit or destroy the battery casing. !" Replace only with the same or equivalent type recommended by the manufacturer. !" Rechargeable batteries became warm during loading (charging the handset); this is a normal process and harmless. !" Do not try to use any power supply except the one provided.
Contents Quick guide ................................................................................................................... 2 Safety Precautions ....................................................................................................... 3 Getting Started ……………………………………………………………………………….. 6 Outline .................................................................................................................................................... Display symbols for handset ............
Contrast ................................................................................................................................................ Wall Paper ............................................................................................................................................. Automatic answering ............................................................................................................................ Selecting another Charger ..................................
Getting Started Outline Handset Earpiece Status LED - Flashes at incoming call Color Display Function display Menu / OK / Option Function display Redial / Back / Clear UP / DOWN key - Open phone book (Down key) LEFT / RIGHT key - Open redialing list (RIGHT key) - Move cursor - Open “Option Mene” - Scroll menu Function key Menu / OK / Option Function key Redial / Back / Clear Headset Socket TALK key - Make a call - Handsfree - Speaker phone END key - End call - One menu level back - Return to stand
Charger LED : ON : Full Charged Flashing : Charging Belt Clip Please insert and fix the belt Clip(packed with the product) into the small groove to be at the both side above handset display. After fixing the belt clip into Handset , you can use Handset with comfortable way.
Display symbols for the handset Symbols On Flashing Communication symbol Connected to a Charger Finding a Charger Internal call symbol Internal call is made Internal call is held Speaker symbol Speaker phone is activated External call symbol External call is made Bell off symbol Bell off of incoming call Battery symbol Batteries status 8 External call is held
Preparing for use Installing the Charger Range Depending on the ambient conditions, the outdoor range is approx. 300 m. The indoor range is approx. 50 m depending on the construction of the building. Connecting 1. Insert the small plug on power supply unit and the small plug on telephone cable into the appropriate sockets on the bottom of the Charger 2. Place cables in each cable duct . Installing the handset Inserting the batteries 1. Open battery compartment and insert included batteries.
Switching the handset on and off The handset is activated as soon as the batteries have been installed. To switch on/off, press the end key - you will hear the beep sound. The handset also is switched on automatically when it is placed in the Charger. If the handset is switched on by placing in the Charger the charging status symbol is displayed. Switching keypad protection on and off You can protect the handset keypad if you are going to carry the handset in your pocket or bag.
General functions Making and answering an external call Making an external call Dialing with pre-dialing When you make a call, you can enter the number and then press TALK key. This is called pre-dialing. 1. Clear: delete the digit one by one. END: The phone number entry is aborted. LEFT: move left the cursor. RIGHT: move right the cursor. 2. Press END to end the call. number entry. !" Insert Pause Attach Pause( P ) to number by press R key more than 2 seconds.
Speaker on and handsfree On the speaker on mode, other persons in the room can listen, in handsfree mode you put down the handset and have your hands free to make notes for example. Speaker On By repeatedly pressing TALK you switch to speaker on mode (once) and handsfree (twice) and back during the call. Switching from normal to speaker on and handsfree mode is shown briefly on the display. The speaker symbol is also visible in both operation modes.
Out of range warning If the handset is out of range from the Charger during the call, the handset warns you with short beeping sounds. Redialing The handset automatically saves the last ten phone numbers dialed. Dialing a number from the redialing list Redial 9P123456 1234567890 01697330516 1. Press Redial or RIGHT to open the redialing list. If not empty, last number is displayed. 2. Select the desired phone number using UP / DOWN key. 3. Press TALK to dial the selected number.
RIGHT: move right the cursor. 8. Press Option 9. Select Save and Press OK to Store. Deleting a number from the redialing list Redial Display Number Copy to PB Delete Entry Delete List OK 1. Press Redial or RIGHT to open the redialing list. If not empty, last number is displayed. 2. Select the desired phone number. 3. Press Option to open sub-menu. 4. Select Delete Entry. 5. Press OK to delete. Back Deleting the redialing list Redial Display Number Copy to PB Delete Entry Delete List OK 1.
Phone book You can store up to 100 telephone numbers. One entry in the phone book consists of the name of 15 characters and the number of 30 digits. Phonebook List hykim abc Eidicom Option The entries are sorted in the following sequence: 1. Space: 2. Digits: 0 – 9 3. Letters (alphabetical) 4. Other characters Back Entering names Use the numeric keys to enter names To insert lower letters, press the # key. To revert to upper case letters, press the # key again.
Add Entry | Name Number Option # 5. Input name up to 15 letters and then press down key to input telephone number. Clear: delete the digit. LEFT: move left the cursor. RIGHT: move right the cursor. 6. Press Option. 7. Select Save and press OK to store. Back Dialing a number from the phone book 1. Press DOWN in standby mode, the phone book is opened directly. 2. Select entry. 3. Press TALK. The number is dialed.
Deleting an entry 1. Press MENU. ( If you press DOWN in standby mode, the phone book is opened directly. ) 2. Select Phonebook and press OK. 3. Select entry. 4. Press Option to open sub menu. 5. Select Delete Entry. 6. Press OK to delete. Deleting the phone book Phonebook Display Number Add Entry Edit Entry Delete Entry Delete List OK Back 1. Press MENU. ( If you press DOWN in standby mode, the phone book is opened directly. ) 2. 3. 4. 5. 6. Select Phonebook and press OK. Press Option to open sub menu.
8. Select the handset number with the appropriate numeric keys. Now, the handset is registered to Wall PAD. Operating several handsets You can operate up to 4 handsets on your Charger. In addition to an internal call between 2 handsets an external call can be held simultaneously with a third handset. Making and answering an internal call Making an internal call 1. Press MENU. 2. Select INT Call and press OK. 3. Enter the handset number. If you want to call all handset, press All.
Transferring a call You can transfer an external call to another handset. 1. Press MENU. 2. Select INT Call and press OK. Calling All 3. Enter the handset number. If you want to call all handset, press the All key 4. When the called party answers, press END to transfer the call All Note: Instead of announcing the call, you can immediately press END. If the called party does not answer the call goes automatically back to you.
Handset settings Ringer volume Five ringer volumes are possible for the handset. Ringer off also is available. 1. 2. 3. 4. 5. Press MENU. Select Handset Set and press OK. Select Ringer Set and press OK. Select Ringer Volume and press OK. Select the desired volume (Off, 1~5). 6. Press OK to save. Ringer melody 1. 2. 3. 4. 5. Press MENU. Select Handset Set and press OK. Select Ringer Set and press OK. Select Ringer Melody and press OK. Select the desired melody (From 1~17). 6. Press OK to save.
3. Select Contrast and press OK. 4. Scroll with UP / DOWN. Automatic answering Auto Answer % On Off OK Back When this function is activated you can remove the handset from the Charger to receive a call. 1. 2. 3. 4. 5. Press MENU. Select Handset Set and press OK. Select Auto Answer and press OK. Select On or Off. Press OK to save. Entering the handset name Handset Name You can assign a name of 8 characters for the handset. If the name is entered, the name is displayed on standby mode. 1. 2. 3. 4.
2. 3. 4. 5. 6. Select Handset Set and press OK. Select Handset PIN and press OK. Enter the current handset PIN (factory setting: 0000). Enter the new handset PIN (4 digits). Reenter the new handset PIN to verify. If match the new handset PIN is saved. Factory settings for the handset Reset All Setting ? The phone book and the handset name are not deleted when you reset the handset. 1. 2. 3. 4. Press MENU. Select Handset Set and press OK. Select Default Set and press OK.
Special Funtion with Wall PAD This DECT Phone work with Home Automation Device especially some of Commax products. Therefore some fuctions are different with normal DECT phone. On line with Door phone 1. When visitor call with Door Phone, your handset rings. 2. To answer the call, press any key except Silent soft key or remove the handset from the Charger (Automatic answering function). 3. Press END to end the call. NOTE : The time of talk is for 1minute.
Reference Trouble shooting Symptom Cause Remedy No display. #" Handset not switched on. #" Handset switches on. #" Battery empty. #" Put handset on the base unit for charging batteries. #" The telephone connection cable is not correctly put. #" Plug in the telephone line cable into the base unit and also check the wall socket connection. No allocation of the switched line. #" The power connection cable is not correctly put. #" The switched line is occupied by another handset.
Technical specifications Wall PAD and handset Standard DECT/GAP Number of channels 120 duplex channels Channel spacing 1.728 MHz Bit rate 1152 kbit/ sec Duplex procedure TDMA (time division multiple access procedure) Voice coding ADPCM (32kbit/s) Modulation GFSK Radio frequency range 1.880 GHz to 1.900 GHz Average transmission power Approx.
Menu table Standby mode Phonebook On-line Menu Display Number Insert Pause Add Entry Edit Entry Phonebook Delete Entry Delete List INT Call Memory Status Tone Handset Set Ringer Set Notebook Contrast Wall Paper Auto Answer Handset Name Language Register Handset PIN Default Set INT Call 26