User manual

15
[Interphone]
ROOM 01
ROOM 02
ROOM 03
ROOM 04
◀ ▶ : Move page
▲ ▼ : Select Room
ENT : ID set
MENU/ SET : Return
[Interphone]
ROOM 01
ROOM 02
▶
[ROOM 03]
ROOM 04
◀ ▶ : Move page
▲ ▼ : Select Room
ENT : 10Set
INTERPHONE : Return
② Use the Right(▷) button and then select a setting using the SET(Y) button and cancel
(N) button and push the ENT button to exit the MENU.
It is possible only when all magnetic switches connected to main unit are closed
(holding time : 60sec)
OSD : [Burglar Y or N]
※ If “Y”is selected for setting, the red security light will flash in the upper side.
If there is a security problem is happened after completing all Burglar function setting,
there will be certain holding time and a siren alarm will be made with OSD message.
(Holding time to release : 30 seconds)
OSD : [WARNING! INVASION]
③ To release, press the ENT button according to OSD MENU
④ The restore is available only when all magnetic switches connected to main unit is closed
2) ROOM ID setting
① After getting in the ROOM ID mode using the MENU/SET button and placing the
▶ mark on required room number and push the ENT button to get out from the MENU.
3) Interphone Pause
① After selecting the INTERPHONE PAUSE mode use the MENU/SET button
and select the SET(Y) button and cancel (N) button and push the ENT button to
get out from the MENU.
OSD : [Interphone pause Y or N]