User manual

Registration
Proceeding...
<Setup>
Burglar
Room ID
Interphone Pause
LCD Adjust
▶DECT Register
▲▼: Select Menu
ENT : Menu Set
MENU/SET : Turn off
Registering...
① Before usage of any wireless phone, each phone must be registered with
the DECT base unit.
② Menu >> Handset Set >> Register >> Base # ID >> Enter PIN
(Personal Identification Number: 4-digits) then press the OK button.
The phone will then be registered in the body of the DECT base.
③ Next, program the registration mode from the body.
① When the registration of a phone is complete, a “beep”will sound and the numbers
1-6 will appear. At this time, register any desired number 1-6 to the phone.
(*Any previously registered number will not appear on screen.)
※ One DECT base is capable of registering up to 6 wireless phones.
※ The registration may take anywhere from 5 ? 60 seconds to process.
※ If the phone fails to register, wait 1 minute before trying to register it again.
♠ Phone Successfully Registered
④ By pressing the MENU/SET button, choose ‘DECT Register’
and press ENTER to register any phone.
Registering a Wireless Phone
Men
Base
Redia
↲
Exit
17
5) DECT Phone Registration