User manual

1). BRIGHT setting

① Press Monitoring button when the handset is hung on properly. (LED Blinking)

② Press BRIGHT button on the left while the screen is turned on. (Beep sound

once)

③ Power LED is blinked as fast (BRIGHT control mode)

④ Adjust the Brightness as the user wants by pressing UP / DOWN button

⑤ Press the BRIGHT button to save the new setting when the setting is over. (Beep

Beep sound)

2). COLOR setting

① Press Monitoring button when the handset is hung on properly. (LED Blinking)

② Press COLOR button on the left while the screen is turned on. (Beep sound once)

③ Power LED is blinked as fast (COLOR control mode)

④ Adjust the color as the user wants by pressing UP / DOWN button

⑤ Press the Color button to save the new setting when the setting is over. (Beep

Beep sound)

3). CONT setting

① Press Monitoring button when the handset is hung on properly. (LED Blinking)

② Press CONT button on the left while the screen is turned on. (Beep sound once)

③ Power LED is blinked as fast (CONT control mode)

④ Adjust the contrast as the user wants by pressing UP / DOWN button

⑤ Press the CONT button to save the new setting when the setting is over. (Beep

Beep sound)

4). RESET (Video Status initialization)

① Keep pressing the reset button for 3Sec while the screen is on (Video status will

be initialized)

3. BRIGHT / COLOR / CONT setting (Available only in Monitoring status)

.in.ua

Home Network