User's Manual

6.1.1. Add scene
1) Press the 'Add Scene' button on the 'Add Scene Main Screen'.
2) Press the 'Create scene directly on selected device', the device selection
dialog window will be displayed.
3) Select the setting device and press the 'OK' button in the upper right.
4) Setting Select and set the properties of the device.
5) Press the Enter Names button at the top of the screen center to set the
name and icon.
[set properties of the device]
[set the name and icon.]
6.1.2. Go Out
Go out /on
The status display of going out setting
When you go out, you can set up these functions security sensor, visitor recording,
light off, close gas valve, indirect call etc.
Go out mode setting
1) Press the icon, away mode will be started.
2) The Go out(away) mode will be executed automatically after the specified
Go out delay time.
3) If you want to cancel go-out mode, press ‘CANCEL’ button.
32