User`s guide

ManualsBrandsCommax ManualsCD-playersDPV-4AE

8 9

④While speaking with the door camera unit from the interphone,

if you press the Call Button a sound will signal and you can simultaneously

communicate between the 3 units:

Door camera unit → Interphone (Sub-unit) → Monitor (DPV-4LH)

⑤ If you wish to call the monitor from the interphone,

press the Call Button on the interphone and a sound will signify

that the connection has been made.

3. Other Functions

▶

Ringer Volume Adjust

① You can adjust the volume of the ring tones from calls.

(Adjusting the dial to the right raises the volume.

Adjusting the dial to the left lowers the volume)

▶

Call Volume Adjust

① You can lower or raise the call volume when speaking with the entrance

and the interphone units. (Adjusting the dial to the right raises the volume.

Adjusting the volume to the left lowers the volume. )

▶

Screen Exposure Adjust

① You can adjust the exposure of the screen from dark to light

(Adjusting the dial to the right brightens the screen.

Adjusting the dial to the left darkens the screen.)

1. Calling a Door Camera Unit

① When there is a visitor at the door, push the Call Button on the monitor

(DPV-4LH) to view the visitor through the monitor.

(Camera 1 LED will blink GREEN, Camera 2 LED will blink ORANGE)

② Pressing the Call Button also allows the user to make calls.

-Camera 1 LED will blink GREEN, Camera 2 LED will blink ORANGE)

-The duration of a call lasts about 60 seconds,

which then the monitor screen will automatically turn off.

-If you wish to recall the entrance,

press the Call Button and then the Entrance Button.

▶

Door Release Function

If the connection has been established,

pressing the Open Button will open or close the entrance door.

① Press the “View ”button to end a call.

② While in standby mode, if you wish to view the entrance,

press the Entrance Button.

▶

Priority Call Function

During a call, to prevent losing connection with the monitor camera

when another incoming call arrives, press the Call Button to keep

you connected with your current conversation.

2. Calling a Interphone Sub unit

① Press the Interphone Button on the monitor to call the interphone (Sub-unit).

Once the interphone responds to the call, conversation can occur.

② If you wish to end the call with the interphone, press the Interphone Button again.

③ While speaking with the interphone from the monitor,

if you press the Call Button a chime from the speaker will sound and

you will be able to simultaneously communicate between the 3 units:

Interphone (Sub-unit) → Monitor (DPV-4LH) → Entrance unit

5. Details