Use and Care Manual

Page 12
SET UP & USE
OPERATION INSTRUCTIONS
ONE SIGNAL: Oven accepts the entry.
TWO SIGNALS: Oven does not accept
the entry, check and try again.
A. One-stage Cooking
1. Use the number pad to set a cooking
time. You can set a cooking time
from one second to 99 minutes and
99 seconds.
2. If you want to set a power level other
than 100% power, touch POWER, and
then use the number pad to enter the
power level. (SEE CHART BELOW)
3. Touch START/STOP to start cooking.
1. Touch CLOCK pad.
2. Use the number pad to enter the
correct time.
3. Touch CLOCK pad again.
NOTE: · This is a 12-hour cycle clock.
When the oven is rst plugged in or
when power resumes after a power
interruption, the display will show
ENTER CLOCK TIME. If you prefer
not to have the clock displayed,
touch RESET.
1. Touch TIMER.
2. Enter the amount of time by touching
the number pad.
3. Touch START/STOP.
NOTE: · The maximum time you can
enter is 99 minutes and 99 seconds.
· Time countdown can be seen in
display before clock or cooking time
returns to display.
· Touch TIMER and then touch
RESET to cancel TIMER during timing
process.
SIGNALS DURING OVEN
SETTINGS
SETTING A COOKING
PROGRAM
SETTING THE CLOCK
SETTING THE OVEN TIMER
Number pad
10
9
8
7
6
5
4
3
2
1
0
Cooking power
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%