SDS

SAFETY DATA SHEET
{ error: graphic file not found:
C:\Program
Files\SAP\FrontEnd\sapgui\W
WI\graphics\LOGO1000.bmp }
Genetron® AZ-20 (R-410A)
000000009881
Version 1.0 0 Issuing date 02/01/2012 Revision Date 02/01/2012 Print Date 07/24/2013
4/12
7. HANDLING AND STORAGE
Handling
Precautions for safe handling : Handle with care.
Avoid inhalation of vapour or mist.
Do not get in eyes, on skin, or on clothing.
Wear personal protective equipment.
Use only in well-ventilated areas.
Pressurized container. Protect from sunlight and do not expose
to temperatures exceeding 50 °C.
Follow all standard safety precautions for handling and use of
compressed gas cylinders.
Use authorized cylinders only.
Protect cylinders from physical damage.
Do not puncture or drop cylinders, expose them to open flame
or excessive heat.
Do not pierce or burn, even after use. Do not spray on a naked
flame or any incandescent material.
Do not remove screw cap until immediately ready for use.
Always replace cap after use.
Advice on protection against
fire and explosion
: The product is not flammable.
Can form a combustible mixture with air at pressures above
atmospheric pressure.
Storage
Conditions for safe storage,
including any
incompatibilities
: Pressurized container: protect from sunlight and do not
expose to temperatures exceeding 50 °C. Do not pierce or
burn, even after use.
Keep containers tightly closed in a dry, cool and well-
ventilated place.
Storage rooms must be properly ventilated.
Ensure adequate ventilation, especially in confined areas.
Protect cylinders from physical damage.
Store away from incompatible substances.
Advice on common storage :
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Components with workplace control parameters––
Components CAS-
No.
Value Control
parameters
Update Basis