Manualshelf

Use and Care Manual

ManualsBrandsCommercial Cool ManualsAir Conditioners6,500 BTU 115 -Volts Window Air Conditioner Cools 450 Sq. Ft. with Remote Control in White
12345678910
ENGLISH
Page 7
SAFETY INFORMATION
POWER CORD USE
The power supply cord contains a current device that senses damage to the power cord.
To test your supply cord follow these steps:
1. Plug in the Air Conditioner.
2. The power supply cord head has two buttons, a TEST button and a RESET button.
Press the TEST button and notice a click as the RESET button pops out.
3. Press the RESET button. Once again notice a click as the button engages.
4. The power supply cord will now supply electricity to the unit.
NOTE:
• Do not use this device to turn the unit on or off.
• Always make sure the reset button is pushed in for correct
operation
• The power supply cord must be replaced if it fails to reset when
either the test button is pushed, or it cannot be reset.
• If power supply cord is damaged, it cannot be repaired.
• It must be replaced by one obtained from the product
manufacturer.
OPERATING CONDITION
The air conditioner must be operated within the temperature range indicated below:
NOTE: · Unit performance may be affected when in use outside of these operating
temperatures.