Item #1001 813 969 Model # 17067 USE AND CARE GUIDE 20 Ft. LED Warm White Tape Light Kit Questions, problems, missing parts? Before returning to the store, call Commercial Electric Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM THANK YOU We appreciate the trust and confidence you have placed in Commercial Electric through the purchase of this LED Power Supply.
Table of Contents Table of Contents .......................................................... 2 Safety Information ......................................................... 2 Warranty ......................................................................... 3 Three (3) Year Warranty.............................................................3 What is Covered ........................................................................3 What is Not Covered .......................................................
Warranty THREE (3) YEAR WARRANTY WHAT IS COVERED The manufacturer warrants this fixture to be free from defects in materials and workmanship for a period of three (3) year from date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service.
Pre-Installation (continued) PACKAGE CONTENTS A Part A Description Quantity 20 ft.
Preparing Installation 1 Installation considerations 2 Optional soldering of the LED light Where will you locate your power supply? How will you switch your LED lighting on and off? What is the best layout configuration for your installation? How will you run and conceal the wires to your LED tape lighting? □ Temporarily mounting the LED light strip using painter’s tape allows you to experiment with tape light positioning before permanent installation.
Preparing Installation (continued) 5 Configuration options □ LED tape strips can be installed in series (strips connected or wired end-to-end) or in parallel (multiple legs of LED strips or series of strips wired directly to a single power supply). □ LED tape lighting power requirements are based on several factors, including your configuration (Straight Run, Center Feed/Loop Back or Array), voltage drop, and the length limitations of the LED tape light.
Preparing Installation (continued) 7 Cutting, connecting and wiring 7.1 □ This tape light model can be cut every three LEDs, or about every 2”. To use solderless LED Snap Connectors, cut the LED with scissors directly in the center of the copper pad as shown in position “A” below. You can also cut the tape at position “B”, however, do not use Snap Connectors on these soldered tape light joints. You can also solder 12V power lead wires at these joints.
Installation 1 Preparing the assembly location □ Before removing the 3M paper backing, it is important to test the LED strip in the space you intend to light. □ Power the LED tape light and temporarily hold or tape into position with painter's tape or masking tape - do not remove the 3M paper backing. □ Adjust the lighting to various angles and positions to get the desired level of illumination and lighting appearance.
Installation (continued) 3 Installing under a cabinet □ To surface mount the LED tape light under a set of cabinets in one continuous run, you may need to drill a 1/2” hole through any cabinet side lip that may be present. Install LED tape light through the hole and surface mount as a continuous run.
Care and Cleaning □ To clean the fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box. Use a dry or slightly dampened, clean cloth to wipe the exterior surface of the fixture. □ Do not use any cleaners with chemicals, harsh abrasives, or solvents. Use only a dry soft cloth to dust or wipe carefully. Troubleshooting Problem Possible Cause Solution Tape light strip does not light. The LED is burned out. The power is off.
FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Questions, problems, missing parts? Before returning to the store, call Commercial Electric Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM Retain this manual for future use.
Núm. de artículo 1001 813 969 Núm. de modelo 17067 GUÍA DE USO Y CUIDADO 20 pies Juego de luces de cinta LED blanco cálido ¿Tiene preguntas, problemas, o faltan piezas? Antes de regresar a la tienda, llame a Servicio al Cliente de Commercial Electric de lunes a viernes de 8 a.m. a 7 p.m., sábado de 9 a.m. a 6 p.m., hora local del Este. 1-877-527-0313 HOMEDEPOT.COM GRACIAS Agradecemos la confianza que ha puesto en Commercial Electric a través de la compra de esta fuente de alimentación LED.
Índice Índice.................... .......................................................... 2 Información de seguridad............................................. 2 Garantía. ......................................................................... 3 Garantía de tres (3) años............................................................3 Lo que está cubierto...................................................................3 Lo que no está cubierto............................................................
Garantía GARANTÍA DE TRES (3) AÑOS LO QUE ESTÁ CUBIERTO El fabricante garantiza que esta luminaria está libre de defectos en materiales y mano de obra por un período de tres (3) años a partir de la fecha de compra. Esta garantía aplica únicamente al comprador consumidor final y únicamente para los productos usados en condiciones de uso y servicio normal.
Pre-instalación (continuación) CONTENIDO DEL PAQUETE A Pieza A Descripción Cantidad 20 pies Cinta LED 1 4
Preparación para la instalación 1 Consideraciones para la instalación 2 Soldadura opcional de la luz LED □ ¿Dónde colocará su fuente de alimentación? □ ¿Cómo encenderá y apagará su iluminación LED? □ ¿Cuál es la mejor configuración de la disposición para su instalación? □ ¿Cómo tenderá y ocultará los cables a su iluminación de cinta LED? □ Monte temporalmente la tira de luces LED usando cinta de pintor antes de la instalación permanente.
Preparación de la instalación (continuación) 5 Opciones de configuración □ Las tiras de cinta LED se pueden instalar en serie (tiras conectadas o cableadas extremo con extremo) o en paralelo (múltiples patas de tiras LED o serie de tiras cableadas directamente a una fuente de alimentación individual).
Preparación de la instalación (continuación) 7 Corte, conexión y cableado □ Este producto está diseñado para instalaciones de iluminación personalizada. Se necesitan destrezas básica como pelado y conexiones de cables de empalme. □ Asegúrese de conectar los cables positivos a los positivos (+ a +), y los cables negativos a los negativos (- a -). La polaridad se identifica fácilmente con las marcas + y - en la cinta LED como se muestra. Positivo + 7.
Instalación 1 Preparación del lugar de montaje □ Antes de retirar el papel protector 3M, es importante probar la tira LED en el espacio que intenta iluminar. □ Encienda la luz de cinta LED y temporalmente sostenga o encinte en su posición con cinta de pintor o cinta de enmascarar, no retire el papel protector 3M. □ Ajuste la iluminación a varios ángulos y posiciones para obtener el nivel y apariencia deseados de iluminación.
Instalación (continuación) 3 Instalación bajo un gabinete □ Para montaje de superficie, la luz de cinta LED bajo un conjunto de gabinetes en un tendido continuo, puede tener que perforar un agujero de 1/2 pulgadas a través del labio lateral de algún gabinete que pueda estar presente. Instale la luz de cinta LED a través del agujero y montaje de superficie como un tendido continuo.
Cuidado y limpieza □ Para limpiar la luminaria, primero desconecte la energía apagando el disyuntor de circuito o retirando el fusible de la caja de fusibles. Use un paño limpio y seco o ligeramente humedecido para limpiar la superficie exterior del dispositivo. No use ningún limpiador con químicos, solventes o abrasivos ásperos. Use solamente un paño suave y seco para quitar el polvo □ o limpie con mucho cuidado. Resolución de fallas Problema Causa posible Solución La tira de luz de cinta no enciende.
Declaración de la FCC Este dispositivo cumple con la parte 15 de las reglas de la FCC. El funcionamiento está sujeto a las siguientes dos condiciones: (1) Este dispositivo no puede causar interferencia dañina, y (2) este dispositivo debe aceptar toda interferencia recibida, incluso la que puede causar un funcionamiento indeseado. PRECAUCIÓN: Cualquier cambio o modificación que no haya sido aprobada por las partes responsables por el cumplimiento podrían anular la autoridad del usuario para operar el equipo.
¿Tiene preguntas, problemas, o faltan piezas? Antes de regresar a la tienda, llame a Servicio al Cliente de Commercial Electric de lunes a viernes de 8 a.m. a 7 p.m., sábado de 9 a.m. a 6 p.m., hora local del Este. 1-877-527-0313 HOMEDEPOT.