Instructions / Assembly
HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Item #1000 226 542
1000 227 037
Model #XXXXXX
Use and Care Guide
Network Wall Plate
Installation
1. Remove the old wall plate from the wall
outlet box.
2. If necessary, trim the cable jacket back
about 2 in., being careful not to nick any
wires inside.
3. If necessary, strip about ½ in. of
insulation off each wire.
4. Attach each wire to the specic terminal
listed in the chart Sbelow. Note that most
residential networks use the T-568B
Standard.
5. Attach the wall plate to the wall using the
two screws located on the back of the
wall plate.
Pin Wall Plate Color Terminal T-568B Standard T-568A Standard
1 Blue White/Orange White/Green
2 Orange Orange Green
3 Black White/Green White/Orange
4 Red Blue Blue
5 Green White/Blue White/Blue
6 Yellow Green Orange
7 Brown White/Brown White/Brown
8 White Brown Brown