Installation Guide

11 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Adjusting the Motion Sensor
Settings
Ceiling Mounted
Stand-by period
Hold time
Detection distance
Light turns on at 100% full brightness
when movement is detected.
Light stays on at 100% brightness
after the moving objects leave the
detection area during the hold time.
After the last detection, the light will
be dimmed down to the stand-by
dimming level of 30% after the hold-
time period expires.
After the stand-by period ends, the
light turns off.
29.5 ft - 52.5 ft
5min
10min
30min
Hold time
Standby
time
5min
10min
30min
Max. 26.2 ft.
Detection angle 30°-150°
Mounting height
29.5 ft.-52.5 ft. (ceiling mounted)
Hold-time 5 min/10 min/30 min/+∞
Stand-by period 5 min/10 min/30 min/+∞
Stand-by dimming level 30%
Detection distance
Operating temperature
-40℃~ +60℃
Max. 26.2 ft.
+∞
+∞
NOTE: When the hold time is adjusted to +∞, the detects motion function is turned off. The light will not be dimmed. When the hold
time is set to 5 min/10 min/30 min, the light will be dimmed to the standby dimming level of 30% automatically after 10 seconds,
and go back to 100% if movement is detected. If the light isn’t dimmed, there is something wrong with the lighting fixture, contact a
qualified electrician or call Commercial Electric customer service 1-877-527-0313.