Installation Guide

7 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Suspension Mounting (continued)
7
Making the electrical connections
Feed the electrical wires from the fixture body (A).
Connect the hot and neutral (black and white) wires from the fixture
body (A) to the same color wires from the electrical box.
Connect the ground (green) wire from the fixture body (A) to the
ground wire from the power supply cover plate and the ground wire
from the electrical box.
Cover the wire connections using the wire connectors (CC).
Wrap the wire connectors (CC) with electrical tape (not included) for
a more secure connection.
Position the wires back inside the fixture body (A) and attach the
power supply cover plate back to the fixture body (A) using the
previously detached screw.
Turn on the light switch to activate the fixture.
1
Install the mounting bracket
Feed the wiring out through the center hole of the electrical box.
Install the mounting bracket (EE) to the mounting surface by using long screws (II), then use the four short screws (JJ) to attach
the two cover plates (FF) to the mounting bracket (EE).
Surface Mounting
CC
FF
EE
Power supply cover
plate
A