Instructions / Assembly

6
Mount to 6 in. Housing with Ears (continued)
5
Pushing the LED light module into the
recessed can
□ Carefully push the LED light module (A) into the recessed can
housing until the trim is flush with the ceiling surface.
NOTICE: Select the preferred color temperature and brightness before
pushing the LED light module into the recessed can housing.
Mount to 6 in. Housing without Ears - Item # 1002948990/Model # 53801101
1
Turning off the power
□ Make sure the power is turned off at the source
to the recessed can housing where the fixture
will be installed. Remove the existing bulb and
trim, revealing the socket.
NOTE: Stick the replacement label on the inner wall of the
recessed housing before installation.
2
Connecting the socket adapter
□ Screw the medium base (E26) socket adapter
(B) into the socket in the recessed housing.
3
Connecting the cables
□ Plug the cable connector on the socket
adapter (B) into the connector on the LED light
module (A).
B
B
A
Ears