Instructions / Assembly

7 HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

Inserting the friction clips into

the recessed can

□ Insert one side of the downlight into the

recessed can and ﬁrmly push against the friction

clip (C), while inserting the other side into the

can housing.

Pushing the LED light module

into the recessed can

□ Carefully push the LED light module (A) into

the recessed can housing until the trim is ﬂush

with the ceiling surface.

NOTICE: Select the preferred color temperature and

brightness before pushing the LED light module into the

recessed can housing.

Mount to 6 in. Housing without Ears (continued)

Friction Clip

Mount to 4 in. Housing - Item 1002948976/Model # 53802101

Turning off the power

□ Make sure the power is turned off at the source

to the recessed can housing where the ﬁxture

will be installed. Remove the existing bulb and

trim, revealing the socket.

NOTE: Stick the replacement label on the inner wall of the

recessed housing before installation.

Connecting the socket adapter

□ Screw the medium base (E26) socket adapter

(G) into the socket in the recessed housing.