Item # 1002982233 Model # 53803111 Use and Care Guide DIRECTIONAL & ADJUSTABLE BEAM ANGLE RECESSED LED DOWNLIGHT Questions, problems, missing parts? Before returning to the store, call Commercial Electric Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM THANK YOU We appreciate the trust and confidence you have placed in Commercial Electric through the purchase of this LED light.
Table of Contents Table of Contents..........................................2 Safety Information.........................................2 Warranty........................................................3 Pre-Installation..............................................3 Planning Installation...................................3 Tools Required............................................3 Package Contents.......................................3 Installation.....................................................
Warranty WHAT IS COVERED The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of five (5) years from date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service.
Installation Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts with the package contents list. If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer service for replacement parts. Mount to 6 in. Housing with C-Clamps 1 Turning off the power 2 Connecting the socket adapter □□ Make sure the power is turned off at the source to the recessed can housing where the fixture will be installed.
Mount to 6 in. Housing with C-Clamps (continued) 5 Pushing the LED light module into the recessed can □□ Carefully push the LED light module (A) into the recessed can housing until the trim is flush with the ceiling surface. Mount to 6 in. Housing without C-Clamps 1 Turning off the power the spring clips 2 Replacing with friction clips □□ Make sure the power is turned off at the source to the recessed can housing where the fixture will be installed.
Mount to 6 in. Housing without C-Clamps (continued) 4 Connecting the cables □□ Plug the cable connector on the socket adapter (B) into the connector on the LED light module (A). B A the friction clips 5 Inserting into the recessed can the LED light module 6 Pushing into the recessed can □□ Insert one side of the downlight into the recessed can and firmly push against the friction clip (C), while inserting the other side into the can housing.
Adjusting the Direction and Beam Angle This downlight allows you to adjust the direction of the light, as well as the beam angle from flood light to spot light. □□ Tilt the head of the recessed downlight to direct the light where desired. □□ Twist the head of the recessed downlight to adjust the beam angle from flood light to spot light. NOTE: The factory default setting for the beam angle is as a Flood Light with a 75° beam angle. ADJUSTING DIRECTION ADJUSTING BEAM ANGLE 7 HOMEDEPOT.
Care & Cleaning CAUTION: Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or removing the fuse from the fuse box. □□ Clean the fixture with a soft, dry cloth. □□ Do not use cleaners with chemicals, solvents, or harsh abrasives. Troubleshooting WARNING: Before doing any work on the fixture, disconnect power to the light fixture by turning the breaker off or removing the fuse from the fuse box.
Notes
Questions, problems, missing parts? Before returning to the store, call Commercial Electric Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM Retain this manual for future use.
Artículo # 1002982233 Modelo # 53803111 MANUAL DE USO Y CUIDADO Downlight empotrada LED direccional CON ÁNGULO DE HAZ AJUSTABLE ¿Preguntas, problemas, piezas faltantes? Antes de devolver el producto a la tienda, llame al Centro de Atención al Cliente de Commercial Electric en el horario de 8 a.m. - 7 p.m., Hora del Este de EE.UU., de lunes a viernes. 9 a.m. - 6 p.m., Hora del Este de EE.UU., sábados. 1-877-527-0313 HOMEDEPOT.
Contenido Contenido.....................................................12 Información sobre seguridad......................12 Garantía........................................................13 Previo a la instalación.................................13 Planificación de la instalación..................13 Herramientas necesarias..........................13 Contenido del paquete..............................13 Instalación...................................................14 Instalación en carcasa de 6 pul.
Garantía CUBRE El fabricante garantiza que este aparato de iluminación no tendrá defectos en los materiales o en la mano de obra por un periodo de cinco (5) años desde la fecha de compra. Esta garantía se aplica sólo al comprador consumidor original y sólo a los productos que se utilizan y reciben servicio en forma normal.
Instalación Antes de comenzar el armado, la instalación o antes de operar el producto, asegúrese de que tiene todas las piezas. Compare las piezas con la lista de contenido. Si falta alguna pieza o si está dañada, no proceda a armar, instalar ni operar el producto. Comuníquese con el servicio al cliente para el reemplazo de las piezas. Instalación en carcasa de 6 pul.
Instalación en carcasa de 6 pul. con abrazaderas en C (continuación) el módulo de la luz LED en 5 Empujar la carcasa empotrada □□ Presione cuidadosamente el módulo de luz LED (A) en la carcasa empotrada hasta que el reborde esté al ras de la supercie del techo. Instalación en carcasa de 6 pul. sin abrazaderas en C las pinzas de muelle con 1 Cortar el suministro eléctrico 2 Colocar broches de fricciónara □□ Asegúrese de cortar el suministro eléctrico a la carcasa empotrada donde se instalará lámpara.
Instalación en carcasa de 6 pul. sin abrazaderas en C (continuación) 4 Hacer las conexiones eléctricas □□ Conecte el conector del cable del adaptador para portalámpara (B) con el conector del módulo de la luz LED (A). B A las pinzas de muelle Empujar el módulo de la luz 5 Insertar 6 en la carcasa empotrada LED en la carcasa empotrada □□ Introduzca un lado del proyector en la carcasa empotrada y empuje firmemente contra el broche de fricción (C), al tiempo que introduce el otro lado en la carcasa.
Ajustar la dirección y el ángulo de haz Este downlight le permite ajustar la dirección de la luz y el ángulo del haz desde la luz difusa hasta la luz direcciónal. □□ Incline la cabeza del downlight empotrado para dirigir la luz donde se desee. □□ Gire la cabeza del downlight empotrado para ajustar el ángulo del haz desde la luz difusa hasta la luz direcciónal. AVISO: La configuración predeterminada de fábrica para el ángulo del haz es como una Luz difusa con un ángulo de haz de 75°.
Cuidado y limpieza PRECAUCIÓN: Antes de limpiar el aparato, desconecte el suministro eléctrico hacia este apagando el cortacircuitos o extrayendo el fusible de la caja de fusibles. □□ Limpie la lámpara con un paño suave y seco. □□ No utilice limpiadores con productos químicos, solventes o abrasivos. Solución de problemas ADVERTENCIA: Antes de realizar cualquier trabajo en el aparato, desconecte el suministro eléctrico hacia este apagando el cortacircuitos o extrayendo el fusible de la caja de fusibles.
Notas 19 HOMEDEPOT.COM Comuníquese al 1-877-527-0313 para solicitar asistencia.
¿Preguntas, problemas, piezas faltantes? Antes de devolver el producto a la tienda, llame al Centro de Atención al Cliente de Commercial Electric en el horario de 8 a.m. – 7 p.m., Hora del Este de EE.UU., de lunes a viernes. 9 a.m. – 6 p.m., Hora del Este de EE.UU., el sábado. 1-877-527-0313 HOMEDEPOT.COM Conserve este manual para uso futuro.