Instructions / Assembly
5 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
5
Pushing the LED light module
into the recessed can
□ Carefully push the LED light module (A) into the
recessed can housing until the trim is flush with
the ceiling surface.
1
Turning off the power
□ Make sure the power is turned off at the
source to the recessed can housing where
the fixture will be installed.
□ Remove the existing bulb and trim, revealing
the socket.
NOTE: Stick the replacement label on the inner
wall of the recessed housing before installation.
Mount to 6 in. Housing without C-Clamps
Mount to 6 in. Housing with C-Clamps (continued)
2
Replacing the spring clips
with friction clips
□ Unscrew the two brackets holding the spring
clips and remove them.
□ Install two friction clips (C) onto the LED light
module (A) using the screws removed from the
spring clip brackets.
B
Housing
without
C-Clamps
3
Connecting the socket adapter
□ Screw the medium base (E26) socket adapter (B)
into the socket in the recessed housing.
A
C