Installation Guide

4
Installation
WARNING: Shut off the power at the circuit breaker or fuse panel before removing the old fixture.
Item 305448046/Model # 53805101 should be installed in 4 in. housings only.
Item 1003456565/Model # 53804101 should be installed in 6 in. housings only.
1
Turning off the power
□ Make sure the power is turned off at the source
to the recessed can housing where the fixture
will be installed.
□ Remove the existing bulb and trim, revealing
the socket.
NOTE: Stick the replacement label on the inner wall of
the recessed housing before installation.
2
Connecting the socket adapter
□ Screw the medium base (E26) socket
adapter (B) into the socket in the recessed
housing.
3
Connecting the cables
□ Plug the cable connector on the socket
adapter (B) into the connector on the LED light
module (A).
B
A
A
B
4
Pushing the LED light module
into the recessed can
□ Carefully push the LED light module (A) into
the recessed can housing until the trim is
flush with the ceiling surface.
NOTICE: Select the preferred color temperature of the light before
pushing the LED light module into the recessed can housing.