Instructions / Assembly

6
Adjusting the Color Temperature of the Light
This LED downlight allows you to customize the color temperature of the
light using five settings from warm white to daylight.
□ Choose your favorite correlated color temperature (CCT) from five
options: 2700K warm white, 3000K soft white, 3500K neutral white,
4000K bright white, or 5000K daylight.
□ Move the toggle switch on the side of the LED downlight (A) to make
your selection before inserting the LED downlight (A) into the ceiling.
NOTE: The factory setting for the correlated color temperature
(CCT) is 2700K, which is the warmest white light.
Changing Black Trim Ring
This downlight allows you to change the color of the trim ring to black.
1. Carefully snap the black trim ring (D) into the center of the LED light module (A).
2. The black trim ring (D) can be removed from the LED light module (A) by using the lever (E) easily.
Selecting Downlight or Nightlight Mode
The produ ct can be used in one of two modes: downlight mode, which provides full brightness and allows selection from five color
temperatures, or nightlight mode. Nighlight mode provides reduced light output at 2000K color temperature for very soft illumination at night.
To turn on the main downlight:
□ Turn on the light switch to activate the light fixture.
To change to nightlight mode with reduced light output from the trim ring:
□ Switch the downlight off and back on again to activate nightlight mode.
NOTE: The main downlight will not provide light output when the nightlight trim is illuminated.
To return to downlight mode with full light output when in nightlight mode:
□ Switch the downlight off and back on again to activate the downlight mode.
Color Temperature
Toggle Switch
2700K
3000K
3500K
4000K
5000K