Manualshelf

Instructions / Assembly

ManualsBrandsCommercial Electric ManualsCommercial Lighting4 ft. 32-Watt Equivalent Integrated LED White Strip Light Linkable Plug-in/Direct Wire 1800 Lumens Multi Color Changing
12345678910
6
4
Preparing to mount the fixture
□ Drill a 1/8-in. pilot hole into the screw locations marked on the ceiling. You can also use an awl or nail to dimple the screw holes.
□ Install a drywall anchor (BB) and a mounting screw (AA) in each drilled mounting hole, but do not tighten fully.
3
Removing one of the knock outs in the fixture
□ Hold the fixture body (B) up to the mounting surface to determine which knock out hole to use for wiring the fixture.
□ Mark two keyhole locations on the mounting surface.
□ Using a screwdriver, punch out one of the large knock out holes in the fixture body (B) for wiring, based on the installation position.
AA
AA
BB
B
Keyholes
BB
Surface Mounting (continued)
B
Knock Out Holes
Keyholes
Knock Out Holes