Installation Guide

13 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
3K - 4K - 5K
Adjusting the Color Temperature of the Light
Care and Cleaning
CAUTION: Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or removing the fuse from the
fuse box.
□ Clean the fixture with a soft, dry cloth.
□ Do not use cleaners with chemicals, solvents, or harsh abrasives.
□ Do not use liquid cleaner on the LEDs, LED driver, or wiring inside the fixture.
Troubleshooting
WARNING: Before doing any work on the fixture, disconnect power to the light fixture.
Minor problems often can be fixed without the help of an electrician.
Problem Possible Cause Solution
The fixture will not light. The power is off. Ensure the power supply is on.
The circuit breaker is off. Ensure the circuit breaker is in the on position.
There is a bad connection. Check to ensure proper wire connections are made.
Contact a qualified electrician.
There is a defective switch. Contact a qualified electrician.
The fuse blows or the circuit breaker
trips when the light is turned on.
The wires are crossed or the power
wire is grounding out.
Check the wire connections.
Contact a qualified electrician or call Commercial
Electric customer service 1-877-527-0313.
B
This LED light fixture allows you to customize the color temperature of the light using three settings: soft white, bright white, or daylight.
□ Move the toggle switch on the fixture body (B) to choose your favorite correlated color temperature (CCT) from three options:
3000k Soft White, 4000k Bright White, or 5000k Daylight.
NOTE: The factory setting for the correlated color temperature (CCT) is 3000K, which is the warmest white light.