Item # 1001820743 Model # 54676141 Use and Care Guide LED WRAP LIGHT WITH MOTION SENSOR Questions, problems, missing parts? Before returning to the store, call Commercial Electric Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.Com THANK YOU We appreciate the trust and confidence you have placed in Commercial Electric through the purchase of this LED light. We strive to continually create quality products designed to enhance your home.
Table of Contents Table of Contents.......................................2 Safety Information.....................................2 Warranty....................................................2 Pre-Installation..........................................3 Planning Installation...............................3 Tools Required........................................3 Package Contents...................................3 Hardware Included..................................3 Installation............................
Pre-Installation PLANNING INSTALLATION Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts with the package contents list. If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer service for replacement parts. Note: Keep your receipt and these instructions for proof of purchase.
Installation Select a suitable location that can support the weight of the fixture. Determine the method of mounting before drilling. WARNING: RISK OF ELECTRIC SHOCK. Ensure the electricity to the wires you are working on is shut off. Either remove the fuse or turn off the circuit breaker before removing the existing light fixture or installing the new one. With power disconnected to your electrical box, remove the existing fixture.
Installation (continued) 3 Feeding the wires NOTE: Put the gasket (BB) on any knock out hole on the fixture to better protect the wires. □□ Feed the electrical connection wires through any knock out hole, through the gasket (BB), and then through the mounting bracket (AA). The connection wires can be held in place by the metal tabs, if needed.
Installation (continued) 6 Attaching the housing to the ceiling □□ Drill a 1/8-in. pilot hole into the screw locations marked on the ceiling. You can also use an awl or nail to dimple the screw holes. □□ Install a drywall anchor (DD) and a mounting screw (EE) in each drilled mounting hole, but do not tighten fully. □□ Align the 2 mounting keyholes on the housing (A) with the 2 mounting screws in the ceiling.
Adjusting the Motion Sensor following settings Driver □□ Detection Area: Factory set at 75% LEDs □□ Hold Time: Factory set at 5 Minutes □□ Daylight Sensor: Factory set at Photocell Disabled Motion Sensor Detection Area DIP 1 DIP 2 75% Daylight Sensor Light Level Hold-time DIP 3 DIP 4 DIP 5 DIP 6 Housing (A) 5 minutes DIP Switches Disabled ADJUSTMENT OPTIONS Detection Area Detection area DIP 1 DIP 2 □□ The motion detection area can be adjusted by selecting the combination of settings on t
Troubleshooting WARNING: Before doing any work on the fixture, disconnect power to the light fixture. Minor problems often can be fixed without the help of an electrician. Problem The fixture will not light. Possible Cause Solution The power is off. Ensure the power supply is on. The circuit breaker is off. Ensure the circuit breaker is in the on position. There is a bad connection. Check to ensure proper wire connections are made. Contact a qualified electrician. There is a defective switch.
Notes 9 HOMEDEPOT.COM Please contact 1-877-527-0313 for further assistance.
Questions, problems, missing parts? Before returning to the store, call Commercial Electric Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM Retain this manual for future use.
Artículo # 1001820743 Modelo # 54676141 GUÍA DE USO Y CUIDADO LÁMPARA LED ENVOLVENTE CON SENSOR DE MOVIMIENTO ¿Preguntas, problemas, piezas faltantes? Antes de devolver el producto a la tienda, llame al Centro de Atención al Cliente de Commercial Electric en el horario de 8 a.m. - 7 p.m., Hora del Este de EE.UU., de lunes a viernes. 9 a.m. - 6 p.m., Hora del Este de EE.UU., sábados. 1-877-527-0313 HOMEDEPOT.
Contenido Contenido.................................................12 Información sobre seguridad..................12 Garantía....................................................12 Previo a la instalación.............................13 Planificación de la instalación..............13 Herramientas necesarias......................13 Contenido del paquete..........................13 Piezas Incluidas....................................13 Instalación..............................................
Previo a la instalación Planificación de la instalación Antes de comenzar el armado, instalación u operación del producto, asegúrese de que tiene todas las piezas. Compare las piezas con la lista de contenido. Si alguna de las piezas faltara o estuviera dañada, no proceda a armar, instalar u operar el producto. Comuníquese con el servicio al cliente para consultar por las piezas de reemplazo. NOTA: Guarde el recibo de compra y estas instrucciones como prueba de compra.
Instalación Seleccione un sitio adecuado que soporte el peso del aparato de iluminación. Determine el método de montaja antes de hacer los orificios. ADVERTENCIA: RIESGO DE DESCARGA ELÉCTRICA. Asegúrese de cortar el suministro eléctrico en los cables con los que trabajará. Extraiga los fusibles o apague el cortacircuitos antes de quitar el aparato de iluminación existente o instalar uno nuevo. Antes de retirar el aparato existente, desconecte la energía hacia la caja eléctrica.
Instalación (continuación) 3 Pasar los cables NOTA: Coloque la junta (BB) en uno de los orificios ciegos del aparato para proteger mejor los cables. □□ Pase los cables por uno de los orificios ciegos y a través de la junta (BB), y luego a través del soporte de montaje (AA). La conexión de cables puede mantenerse en el lugar con las pestañas de metal, si es necesario.
Instalación (continuación) 6 Unir la caja al techo □□ Taladre un orifico piloto de 1/8 pulgadas en los sitios de los tornillos marcados en el techo. También puede usar una lezna o clavo para marcar los orificios de los tornillos. □□ Instale un anclaje para picra (DD) y un tornillo de montaje (EE) en cada uno de los orificios, pero no los apriete completamente. □□ Alinee los 2 orificios de montaje en la caja (A) con los 2 tornillos de montaje en el techo.
Ajuste del sensor de movimiento CONFIGURACIóN DE FÁBRICA □□ Área de detección: Configuración de fábrica al 75% □□ Tiempo de encendido: Configuración de fábrica al 5 minutos □□ Sensor de día: Configuración de fábrica al Fotocelda desactivada Área de detección del Sensor de ocupación DIP 1 DIP 2 LEDs Nivel de luz del sensor durante el día Tiempo de encendido DIP 3 Unidad LED DIP 4 DIP 5 DIP 6 Caja (A) 75% 5 minutos Desactivado Interruptores DIP opciones de ajuste Área de detección Área de detecc
Solución de problemas ADVERTENCIA: Antes de realizar cualquier trabajo en el aparato, desconecte la electricidad que la alimenta. Los problemas menores pueden arreglarse sin ayuda de un electricista. Problema La lámpara no enciende. Causa posible Medida correctiva El suministro eléctrico está cortado. Asegúrese de que el suministro eléctrico esté activado. El interruptor está apagado. Asegúrese de que el interruptor esté en la posición de encendido. Hay una mala conexión.
Notas 19 HOMEDEPOT.COM Comuníquese al 1-877-527-0313 para solicitar asistencia.
¿Preguntas, problemas, piezas faltantes? Antes de devolver el producto a la tienda, llame al Centro de Atención al Cliente de Commercial Electric en el horario de 8 a.m. – 7 p.m., Hora del Este de EE.UU., de lunes a viernes. 9 a.m. – 6 p.m., Hora del Este de EE.UU., el sábado. 1-877-527-0313 HOMEDEPOT.COM Conserve este manual para uso futuro.