Installation Guide

ManualsBrandsCommercial Electric ManualsCommercial Lighting3.5 ft. 40-Watt Black LED Shop Light with Bluetooth Speakers 3600 Lumens 4000K Bright White

Item # 1005749486

Model # 55703141

PACKAGE CONTENTS

Part Description Quantity

A Shop Light 1

HARDWARE INCLUDED

Part Description Quantity

AA Mounting Chain 2

BB Drywall Anchor 2

CC Hook Screw 2

NOTE: Keep your receipt and these instructions for proof of purchase.

WARNING: RISK OF ELECTRIC SHOCK. Ensure the electricity to the wires you are working on is shut off. Either remove the

fuse or turn off the circuit breaker before removing an existing light ﬁxture or installing the new one.

If you are unfamiliar with electrical installations, we recommend you contact a qualiﬁed electrician to do the installation.

USE AND CARE GUIDE

42 IN. LED SHOP LIGHT WITH BLUETOOTH

SPEAKERS

AA BB

30 in.

760mm

INSTALLATION PREPARATION

Select a suitable location that can support the weight of the ﬁxture. Determine the method for mounting the ﬁxture before

drilling, based on the type of ceiling.

1. Mark two spots on the ceiling 30 in. (760mm) apart for suspension mounting before the installation.

MOUNTING TO A DRYWALL CEILING:

a. Drill a 1/8-in. pilot hole into each of the screw locations marked on the ceiling. You can also use an awl or nail to dimple the

screw holes.

b. Install a drywall anchor (BB) and a hook screw (CC) in each drilled mounting hole.

NOTE:

The drywall anchors (BB) are only to be used for mounting the ﬁxture to plaster or drywall surfaces

MOUNTING TO A WOOD CEILING:

a. Drill a 1/16 in. diameter pilot hole in the ceiling.

b. Tighten the hook screw (CC) into the wood.

Summary of content (8 pages)

PAGE 1
Item # 1005749486 Model # 55703141 Use and Care Guide 42 IN. LED SHOP LIGHT WITH BLUETOOTH® SPEAKERS Package Contents Part A Description Shop Light A Quantity 1 Hardware Included Part AA BB CC Description Mounting Chain Drywall Anchor Hook Screw Quantity 2 2 2 AA BB CC NOTE: Keep your receipt and these instructions for proof of purchase. WARNING: RISK OF ELECTRIC SHOCK. Ensure the electricity to the wires you are working on is shut off.
PAGE 2
. Attach the S hook at the bottom of the mounting chain (AA) to the hanger on the shop light (A). Repeat this step on the other side of the fixture. Then close all hooks with pliers to secure them. AA Hanger A 3. Hang the shop light (A) by placing one chain (AA) over each hook screw (CC) that has been installed on the ceiling. 4. Adjust chains to level light. The fixture must hang at least 3 in. from the ceiling. CC AA A 5. Plug the electrical plug adapter into an electrical outlet. 6.
PAGE 3
Connect to Bluetooth wireless technology enabled Device 1. Plug the power cord for the Commercial Electric 42 in. Shop Light with Bluetooth speakers into an electrical outlet. When plugged in, the speakers will emit a brief series of tones to indicate that the speakers have power. 2. Enable Bluetooth on your smart device. 3. Wait for the smart device to detect the shop light and then select it to pair the device to the speakers.
PAGE 4
Troubleshooting (continued) Problem Possible Cause Solution There is no sound or poor sound quality from the speakers. Music settings on the smart device need to be adjusted. Turn music on from the smart device. Turn volume up from the smart device. Ensure the Bluetooth function is turned on within the device settings. A Bluetooth symbol should be visible somewhere on the device screen. Charge up the device being paired with the shop light.
PAGE 5
Artículo # 1005749486 Modelo # 55703141 GUÍA DE USO Y CUIDADO LÁMPARA DE LUZ LED DE 42 PULGADAS CON PARLANTES BLUETOOTH® CONTENIDO DEL PAQUETE Pieza Descripción A Dispositivo de luz A Cantidad 1 MATERIALES INCLUIDOS Pieza AA BB CC Descripción Cadena de soporte Anclaje para yeso Tornillo de gancho Cantidad 2 2 2 AA BB CC NOTA: Guardar el recibo de compra y estas instrucciones como prueba de compra. ADVERTENCIA: RIESGO DE DESCARGA ELÉCTRICA.
PAGE 6
2. Fije el gancho S en la parte inferior de la cadena de montaje (AA) a la percha en la lámpara de taller (A). Repita este paso en el otro lado del aparato. Luego cierre todos los ganchos con alicates para asegurarlos. AA Percha A 3. Cuelgue la lámpara de taller (A) colocando una cadena (AA) sobre cada gancho (no incluido) que se ha instalado en el techo. 4. Ajuste las cadenas para nivelar la lámpara. La lámpara debe colgar al menos 3 pulgadas del techo. CC AA A 5.
PAGE 7
Conexión a un dispositivo inalámbrico Bluetooth 1. Conecte el cable de corriente de la Lámpara de 40 pulgadas de Commercial Electric con parlantes Bluetooth en un tomacorriente Una vez conectado, los parlantes emitirán una breve serie de tonos para indicar que los parlantes tienen alimentación. 2. Habilite el Bluetooth en su dispositivo inteligente. 3. Espere a que el dispositivo inteligente detecte la lámpara y luego selecciónelo para conectar el dispositivo con los parlantes.
PAGE 8
Solución de problemas (continuación) Problema No sale el sonido de los parlantes o es de muy mala calidad. Causa posible Se necesita ajustar las configuraciones de música en el dispositivo inteligente. La función Bluetooth está apagada en el dispositivo inteligente. El dispositivo Bluetooth está demasiado lejos de los parlantes de la lámpara. Hay interferencia que provoca confusión en la conexión. Medida correctiva Encienda la música en el dispositivo inteligente.