Item # 1003906484 Model # 56514141 Use and Care Guide COMMERCIAL LED WRAP LIGHT Questions, problems, missing parts? Before returning to the store, call Commercial Electric Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM THANK YOU We appreciate the trust and confidence you have placed in Commercial Electric through the purchase of this LED light. We strive to continually create quality products designed to enhance your home.
Table of Contents Table of Contents.......................................2 Safety Information.....................................2 Warranty....................................................2 Pre-Installation..........................................3 Planning Installation...............................3 Tools Required........................................3 Package Contents...................................3 Hardware Included..................................4 Installation............................
Pre-Installation PLANNING INSTALLATION Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts with the package contents list. If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer service for replacement parts. Note: Keep your receipt and these instructions for proof of purchase.
Installation Select a suitable location that can support the weight of the fixture. Determine the method of mounting before drilling. WARNING: RISK OF ELECTRIC SHOCK. Ensure the electricity to the wires you are working on is shut off. Either remove the fuse or turn off the circuit breaker before removing the existing light fixture or installing the new one. With power disconnected to your electrical box, remove the existing fixture.
Installation (continued) 2 Disconnecting the wire way cover from the housing □□ Squeeze the two sides of the wire way cover on the inside of the housing (A) while also pushing inward on the tabs on the back side of the housing (A) to detach the wire way cover from the housing (A). □□ Repeat for the other two locations where the wire way cover is attached to the housing (A) to free the wire way cover from the housing (A). □□ Remove the wire way cover from the housing (A) to reveal the wiring.
Installation (continued) 4 Feeding the wires □□ Feed the electrical connection wires through any knock out hole and then through the mounting bracket (AA). AA A B NOTE: Multiple Commercial Wrap Lights can be connected, up to a maximum of 10 light fixtures. Only the first fixture needs to be directly wired to an electrical box. Do not exceed 300 total watts for interconnected lights.
Installation (continued) 6 Attaching the mounting bracket to the electrical box □□ Mount the mounting bracket (AA) to the electrical box using the two electrical box screws (BB). Single Fixture Wiring Continuous Mount Wiring AA NOTE: Tuck all electrical connections into the electrical box. AA BB BB NOTE: Electrical connections will be covered by the wire way cover. 7 Attaching the housing to the ceiling □□ Drill a 3/4-in.
Installation (continued) 8 Reattaching the wire way cover □□ Reconnect the terminal ground wire from the wire way cover to the housing (A). □□ Reattach the wire way cover to the wrap light housing (A) by squeezing the wire way cover and inserting the tabs into the openings in the housing (A). NOTE: If electrical connections are inside the wrap light housing (A), ensure the wire connections are covered by the wire way cover.
Continuous Mounting 1 Preparing to connect the fixtures □□ Using a screwdriver, punch out the knock out hole on the end of each wrap light housing (A) where the two fixtures will connect. B B A A 2 Mounting end-to-end A □□ Insert a 7/8 in. outer diameter fitting threaded coupler (not included) through both open knock out holes. □□ Secure the coupler with 2 threaded nuts (not included). □□ Run jumper wires (not included) through the threaded coupler to make the electrical connections.
Continuous Mounting (continued) 4 Making the electrical connections □□ Connect the jumper wires (not included) from the coupler or the wires in the metal conduit to make the electrical connections between fixtures. □□ Connect the hot and neutral (black and white) wires from one wrap light housing (A) to the same color wires of the other wrap light housing (A). □□ Connect the green ground wire from one wrap light housing (A) to the green ground wire of the other wrap light housing (A).
Care and Cleaning CAUTION: Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or removing the fuse from the fuse box. □□ Clean the fixture with a soft, dry cloth. □□ Do not use cleaners with chemicals, solvents, or harsh abrasives. □□ Do not use liquid cleaner on the LEDs, LED driver, or wiring inside the light fixture. Troubleshooting WARNING: Before doing any work on the fixture, disconnect power to the light fixture.
Questions, problems, missing parts? Before returning to the store, call Commercial Electric Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM Retain this manual for future use.
Artículo # 1003906484 Modelo # 56514141 GUÍA DE USO Y CUIDADO LÁMPARA LED ENVOLVENTE COMERCIAL ¿Preguntas, problemas, piezas faltantes? Antes de devolver el producto a la tienda, llame al Centro de Atención al Cliente de Commercial Electric en el horario de 8 a.m. - 7 p.m., Hora del Este de EE.UU., de lunes a viernes. 9 a.m. - 6 p.m., Hora del Este de EE.UU., sábados. 1-877-527-0313 HOMEDEPOT.COM GRACIAS Apreciamos la confianza que ha puesto en Commercial Electric a través de la compra de esta luz LED.
Contenido Contenido.................................................14 Información sobre seguridad..................14 Garantía....................................................14 Previo a la instalación.............................15 Planificación de la instalación..............15 Herramientas necesarias......................15 Contenido del paquete..........................15 Piezas Incluidas....................................15 Instalación..............................................
Previo a la instalación Planificación de la instalación Antes de comenzar el armado, instalación u operación del producto, asegúrese de que tiene todas las piezas. Compare las piezas con la lista de contenido. Si alguna de las piezas faltara o estuviera dañada, no proceda a armar, instalar u operar el producto. Comuníquese con el servicio al cliente para consultar por las piezas de reemplazo. NOTA: Guarde el recibo de compra y estas instrucciones como prueba de compra.
Instalación Seleccione una ubicación adecuada que pueda soportar el peso del aparato. Determinar el método de montaje de la lámpara antes de la perforación. ADVERTENCIA: RIESGO DE DESCARGA ELÉCTRICA. Asegúrese de cortar el suministro eléctrico en los cables con los que trabajará. Extraiga los fusibles o apague el cortacircuitos antes de quitar el aparato de iluminación existente o instalar uno nuevo. Con la alimentación desconectada de la caja eléctrica, retire la lámpara existente.
Instalación (continuación) 2 Separar la cubierta del canal de cables de la caja □□ Presione los dos lados de la cubierta del canal de cables en el interior de la caja (A) mientras empuja hacia adentro las pestañas de la parte posterior de la caja (A) para separar la cubierta del canal de cables de la caja (A). □□ Repita el procedimiento para las otras dos ubicaciones donde la cubierta del canal de cables está sujeta a la caja (A) para liberar la cubierta del canal de cables de la caja (A).
Instalación (continuación) 4 Pasar los cables □□ Pase los cables por uno de los agujeros ciegos y luego a través del soporte de montaje (AA). AA A B NOTE: Multiple Commercial Wrap Lights can be connected, up to a maximum of 10 light fixtures. Only the first fixture needs to be directly wired to an electrical box. Do not exceed 300 total watts for interconnected lights.
Instalación (continuación) 6 Instalar el soporte de montaje a la caja eléctrica □□ Instale el soporte de montaje (AA) a la caja eléctrica usando los dos tornillos de la caja eléctrica (BB). Cableado para una sola lámpara Cableado para lámparas en serie AA AA NOTA: Meta todas las conexiones eléctricas en la caja eléctrica. BB BB NOTA: Las conexiones eléctricas serán cubiertas por la cubierta del canal de cables.
Instalación (continuación) 8 Colocar la cubierta del canal de cables □□ Vuelva a conectar el cable a tierra del terminal desde la cubierta del canal de cables hasta la caja (A). □□ Vuelva a colocar la cubierta del canal de cables en la caja de la lámpara envolvente (A) apretando la cubierta de canal de cables e insertando las pestañas en las aberturas de la caja (A).
Instalación en serie 1 Preparación para la conexión de los accesorios □□ Con un destornillador, perfore el orificio ciego en el extremo de cada caja de lámpara envolvente (A) donde se conectarán los dos lámparas. B B A A 2 Montar de extremo a extremo A □□ Inserte un acoplador roscado de diámetro exterior de 7/8 pulg. (no incluido) a través de los dos orificios ciegos. □□ Asegure el acoplador con 2 tuercas roscadas (no incluidas).
Instalación en serie (continuación) 4 Hacer las conexiones eléctricas □□ Conecte los cables de puente (no incluidos) del acoplador o los cables en el conducto metálico para realizar las conexiones eléctricas entre las lámparas. □□ Conecte los cables vivo y neutro (negro y blanco) de una caja de lámpara envolvente (A) a los cables del mismo color de la otra caja de lámpara envolvente (A).
Cuidado y limpieza PRECAUCIÓN: Antes de limpiar el aparato, desconecte el suministro eléctrico hacia este apagando el cortacircuitos o extrayendo el fusible de la caja de fusibles. □□ Limpie el aparato con un paño suave y seco. □□ No utilice limpiadores con productos químicos, solventes o abrasivos. □□ No use limpiador líquido en las bombillas LED, en la unidad LED ni en los cables que están dentro de del aparato.
¿Preguntas, problemas, piezas faltantes? Antes de devolver el producto a la tienda, llame al Centro de Atención al Cliente de Commercial Electric en el horario de 8 a.m. – 7 p.m., Hora del Este de EE.UU., de lunes a viernes. 9 a.m. – 6 p.m., Hora del Este de EE.UU., el sábado. 1-877-527-0313 HOMEDEPOT.COM Conserve este manual para uso futuro.