Installation Guide

ManualsBrandsCommercial Electric ManualsFlush Mount Lights13 in. Color Selectable LED Flush Mount with Night Light Feature Optional White and Oil Rubbed Bronze Trim Rings

Item # 1005576342/ 1005682971/ 1005576359

1005683161/ 1005576354/ 1005683079

Model # 56582111/ 56582112/ 56583111

56583112/ 56584111/ 56584112

PACKAGE CONTENTS

Part Description Quantity

A Fixture Body 1

HARDWARE INCLUDED

Part Description Quantity

AA Mounting Bracket 1

BB Mounting Screw (for Electrical Box) 2

CC Wire Connector 2

DD Trim Ring 1

NOTE: Keep your receipt and these instructions for proof of purchase.

WARNING: RISK OF ELECTRIC SHOCK. Ensure the electricity to the wires you are working on is shut off. Either remove the

fuse or turn off the circuit breaker before removing an existing light ﬁxture or installing the new one.

If you are unfamiliar with electrical installations, we recommend you contact a qualiﬁed electrician to do the installation.

USE AND CARE GUIDE

CONTEMPORARY LOW PROFILE FLUSHMOUNT WITH NIGHTLIGHT

9 IN., 11 IN. AND 13 IN.

Side slot

STEP 1. STEP 2. STEP 3.

INSTALLATION

Select a suitable location that can support the weight of the ﬁxture. Determine the method for mounting the ﬁxture before

drilling, based on the type of ceiling.

SURFACE MOUNTING WITHOUT RECESSED MOUNTING BRACKET

1. Pass the hot and neutral (black and white) wires from the electrical outlet box through the middle hole of the mounting

bracket (AA).

Align the mounting bracket (AA) using the mounting screws (BB) and tighten securely to the electrical box.

2. Connect the hot and neutral (black and white) wires from the ﬁxture body (A) to the same color wires from the electrical box.

Cover the wire connectors (CC) with electrical tape for a more secure connection.

3. Position the wires back inside the electrical box.

Align the side slots on the ﬁxture body (A) with the mounting bracket (AA) and ﬁx the ﬁxture body (A) securely by carefully

rotating in clockwise the side slots inside the mounting bracket (AA).

4. Restore power at the electrical panel. Turn on the light switch to activate the ﬁxture.

AA BB CC

Summary of content (8 pages)

PAGE 1
Item # 1005576342/ 1005682971/ 1005576359 1005683161/ 1005576354/ 1005683079 Model # 56582111/ 56582112/ 56583111 56583112/ 56584111/ 56584112 Use and Care Guide Contemporary Low Profile Flushmount with Nightlight 9 in., 11 in. and 13 in.
PAGE 2
Changing Color Trim Ring This flushmount allows you to customize the color of the trim ring. NOTE: The product is shipped with the white trim ring installed on the flushmount. REMOVE THE TRIM RING Hold both sides of the lamp, and rotate the fixture body (A) with two thumbs according to the direction of the arrow on the fixture body (A) to remove the white trim ring.
PAGE 3
Care and Cleaning CAUTION: Before attempting to clean the tube and luminaire/light fixture, disconnect the power to the fixture by turning the breaker off or removing the fuse from the fuse box. Clean with a soft, dry cloth. Do not use cleaners with chemicals, solvents, or harsh abrasives. Do not use liquid cleaner on the LEDs, LED driver, or wiring. Troubleshooting Minor problems often can be fixed without the help of an electrician.
PAGE 4
WARRANTY WHAT IS COVERED The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of five (5) years from date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service.
PAGE 5
Artículo # 1005576342/ 1005682971/ 1005576359 1005683161/ 1005576354/ 1005683079 Modelo # 56582111/ 56582112/ 56583111 56583112/ 56584111/ 56584112 MANUAL DE USO Y CUIDADO LÁMPARA MODERNA EMPOTRADA DE PERFIL BAJO CON LUZ NOCTURNA 9, 11, Y 13 PULG.
PAGE 6
CAMBIAR EL ANILLO EMBELLECEDOR COLOREADO La lámpara empotrada le permite personalizar el color del anillo embellecedor: blanco o negro. NOTA: El producto se envía con el anillo embellecedor blanco instalado en la lámpara empotrada. RETIRAR EL ANILLO EMBELLECEDOR Sujete ambos lados de la lámpara y gire el cuerpo de la lámpara (A) con dos pulgares según la dirección de la flecha en el cuerpo de la lámpara (A) para quitar el anillo embellecedor blanco.
PAGE 7
Cuidado y limpieza PRECAUCIÓN: Antes de limpiar la lámpara, desconecte el suministro eléctrico hacia ésta apagando el cortacircuitos o extrayendo el fusible de la caja de fusibles. Limpie la lámpara con un paño suave y seco. No utilice limpiadores con productos químicos, solventes o abrasivos. No use limpiador líquido en las LED, en el controlador LED ni en los cables que están dentro de la lámpara.
PAGE 8
Garantía CUBRE El fabricante garantiza que este aparato de iluminación no tendrá defectos en los materiales o en la mano de obra por un periodo de cinco (5) años desde la fecha de compra. Esta garantía se aplica sólo al comprador consumidor original y sólo a los productos que se utilizan y reciben servicio en forma normal.