Installation Guide

5 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Installation
1
Turning off the power
□ Place the wall switch in the off position.
□ Turn off the main power at the breaker panel or remove the fuse from the fuse box.
2
Preparing the installation location
□ Use the template (D) to mark the desired installation
location.
□ Use a drywall saw to cut the opening marked by the
template.
D
3
Connecting the wires
□ Open the junction box (A) cover and remove the knockout
(1) on the side panel.
□ Insert the electrical supply cable through the knockout (1).
□ Using the quick-connect push terminals, connect the green
ground wire from the junction box (A) to the ground wire
from the supply circuit, the black wire from the junction
box (A) to the black wire from the supply circuit, and the
white wire from the junction box (A) to the white wire from
the supply circuit.
□ Secure the wire in the knockout hole using a cable clamp
(not provided).
□ Place all wiring and connections into the junction box (A)
and close the cover.
□ Plug the connector cable from the junction box (A) into the
connector cable from the light panel (C).
A
C
A
1