Pre-Operation Pre-Operation (continued) PACKAGE CONTENTS PRODUCT SPECIFICATIONS Component Operating temperature Humidity Storage environment D Altitude Specification 32-104°F(0-40°C) Up to 80% relative humidity 14° F to 122° F (-10 to 50°C) with a maximum 70% relative humidity Up to 2000 meters MINIMUM VOLTAGE SPECIFICATIONS Battery Type Button cell 1.5V AAA-N-1.5V AA-C-D-1.5V Lithium 3V 6V 9V 12V 15V 22.
Operation (continued) Operation (Continued) 2 4 TESTING A BATTERY Set the battery selector (C) to the type of battery you are testing. D IMPORTANT: If the battery selector (C) is incorrectly positioned, an inaccurate test will result and may damage the tester and cause excessive drain on the battery. F H G Touch the red test lead (A) to the positive (+) terminal on the battery, and the black test lead (B) to the ne gative (–) terminal on the battery.
Operation (continued) MARGINAL READINGS The condition of a battery is marginal when the needle indicator rests in the 60%-70% (yellow) area on the REGULAR portion of the indicator scale (D). Consider replacing the battery if the measurement is in this area. Care and Cleaning Periodic maintenance of this instrument is not required. However, should the unit require cleaning,wipe it with a soft cloth dampened in a mild soap and water solution.
Pre-Funcionamiento (Continuación) Pre-Funcionamiento ESPECIFICACIONES DEL PRODUCTO CONTENIDO DEL EMPAQUE Componente Temperatura de funcionamiento Humedad Ambiente de almacenamiento D Especificación 32-104°F (0-40°C) Hasta 80 % de humedad relativa 14 a 122°F (-10 a 50°C) con un máximo de 70 % de humedad relativa Hasta 2000 metros Altitud ESPECIFICACIONES MÍNIMAS DE VOLTAJE E Tipo de Batería Batería botón 1.5V AAA-N-1.5V AA-C-D-1.5V Litio 3V 6V 9V 12V 15V 22.
Funcionamiento (Continuación) Funcionamiento (Continuación) 2 4 PROBANDO UNA BATERIA Fije el selector de batería (C) en el tipo de batería que usted está probando. IMPORTANTE: Si el selector de la batería (C) está incorrectamente colocado, el resultado será una prueba inexacta y puede dañar el medidor y provocar un consumo excesivo de la batería.
Funcionamiento (Continuación) LECTURAS MARGINALES La condición de una batería es marginal cuando la aguja descansa en el área de 60 % - 70 % (amarilla) en la porción REGULAR de la escala del indicador (D). Considere reemplazar la batería si la medida se encuentra en esta área. Cuidado y Limpieza No se requiere un mantenimiento periódico de este instrumento. Sin embargo, si la unidad requiere de limpieza, límpiela con un paño suave humedecido en una solución suave de jabón y agua.