Use and Care Manual

ManualsBrandsCommercial Electric ManualsCommercial Lighting2 ft. x 4 ft. 50-Watt 6250 Lumens White Integrated LED Back-Lit Panel Light in Warm White, 3500K

THANK YOU

to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home

improvement needs. Thank you for choosing Commercial Electric!

USE AND CARE GUIDE

LED FLAT PANEL FIXTURE

BLP-14-U-P-XX-XXK-80-D-X

BLP-22-U-P-XX-XXK-80-D-X

BLP-24-U-P-XX-XXK-80-D-X

Questions, problems, missing parts? Before returning to the store,

call Commercial Electric Customer Service

8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday

1-877-527-0313

HOMEDEPOT.COM

Table of Contents

Table of Contents ................................... 2

Safety Information .................................. 2

Warranty .......................................... 2

Pre-Installation ..................................... 3

Tools Required .................................... 3

Hardware Included................................. 3

.................................

Installation

Speciﬁcation

......................................

Safety Information

For your safety, always remember to:

□ Turn off the power supply at the fuse or circuit breaker box

before you install the ﬁxture.

□ Ground the ﬁxture to avoid potential electric shocks and to

ensure reliable starting.

□ Double-check all connections to be sure they are

tight and correct.

□ Wear rubber soled shoes and work on a sturdy

wooden ladder.

□ Account for small parts and destroy packing material, as these

may be hazardous to children.

This ﬁxture is designed for use in a circuit protected by a fuse or

circuit breaker. It is also designed to be installed in accordance with

local electrical codes. If you are unsure about your wiring, consult a

qualiﬁed electrician or local electrical inspector, and check your local

electrical code.

WARNING: RISK OF SHOCK. House electric current can

cause painful shock or serious injury unless handled properly.

CAUTION: Turn off the main power at the circuit breaker

before installing the ﬁxture, in order to prevent possible shock.

NOTICE: All electrical connections must be in accordance with local

and National Electrical Code (N.E.C.) standards. If you are unfamiliar

with proper electrical wiring connections obtain the services of a

qualiﬁed electrician.

Remove the ﬁxture and the mounting package from the box and make

sure that no parts are missing by referencing the illustrations on the

installation instructions.

Supplier’s Declaration of Conformity 47 CFR § 2.1077 Compliance Information

Unique Identiﬁer: See detail on speciﬁcation in user manual with marked

Responsible Party – U.S. Contact Information

ERAN FINANCIAL SERVICES LLC

3500 NW Boca Raton Blvd, Suite717, Jupiter,

Florida, 33427 , United States

Telephone Number:845-264-4855

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following

measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any changes or modiﬁcations not expressly approved by the

manufacture could void the user’s authority to operate the equipment.

Warranty

LIMITED WARRANTY

This product is warranted to be free from defects in workmanship and materials for up to 5 years from date of purchase. If it fails to do so,

please contact the Customer Service Team at 1-877-527-0313 or visit www.HomeDepot.com.

3 HOMEDEPOT.COM

Please contact 1-877-527-0313 for further assistance.

Recessed Installation

Pre-Installation

TOOLS REQUIRED

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

Part Description Quantity

EE Wire Nuts 5

Power Drill

0-10V Dimming Schematic

WARNING: Refer to Local and National Electrical codes

for correctly sizing wire gauge and making the proper

electrical connections and ground connections to prevent

electrical shock and risk of ﬁre. Installation requires

knowledge of luminaires and electrical systems. If not

qualiﬁed, do not attempt installation. Contact a qualiﬁed

licensed electrician, to ensure wiring is correct and in

compliance of local codes.

gray

0-10 Volt Dimmer

(Supplied by others)

Lighting Fixture,

0-10v dimming LED

Driver

Lighting Fixture,

0-10v dimming LED

Driver

gray

purple

Ground-green

Neutral

white

black

gray

purple

white

black

Line Black

Red/white

Red

REMARK:

Please reference the dimmers manufacturer wiring diagrams for correct wiring of 0-10 Volt Dimmer.

210*290mm

54 6

Making the Electrical Connections

Removing the

ceiling panel

a. Remove the plasterboard

panel from the ceiling.

Connecting the

wires

a. Lift the ﬁxture to the ceiling.

Follow the steps in the

Making the Electrical

Connections section of

this manual.

Completing the

installation

a. Slide the ﬁxture into place

in the ceiling.

b. Restore power to the ﬁxture.

Earthquake

Clip

Open the junction box

Unscrew and remove the junction

box cover (1) from the ﬁxture.

Connect the supply

wires

a. Connect the green ground wire

from the ﬁxture to the supply

ground wire.

b. Connect the white wire from the

ﬁxture to the supply white wire

(neutral wire).

c. Connect the black wire from the

ﬁxture to the supply black wire

(live wire).

d. Secure the three connections

using three of the supplied wire

nuts (AA).

e. Wrap the three wire connections

with electrical tape for a more

secure connection (electrical

tape not included).

Connect the dimming

wires

a. Connect the purple wire from

the ﬁxture to the purple (DIM+)

supply wire.

b. Connect the gray wire from the

ﬁxture to the gray (DIM-) supply

wire.

c. Secure the two connections

using the remaining two

supplied wire nuts (AA).

d. Wrap the two wire connections

with electrical tape for a more

secure connection (electrical

type not included).

Reinstall the junction

box cover

a. Position the wires back inside

the junction box.

b. Reinstall the junction box

cover (1).

Questions, problems, missing parts? Before returning to the store,

call Commercial Electric Customer Service

8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday

1-877-527-0313

HOMEDEPOT.COM

Safety

goggles

Ladder

Electrical

tape

Flathead

screwdriver

Wire

cutters

Wire

strippers

Hammer

Before You Begin

1. Turn off the electricity at the circuit breaker or fuse box.

2. Choose your installation option:

• Installation Option 1 – Recessed Mount

• Installation Option 2 – Surface Mount Kit (Sold Separately)

• Installation Option 3 – Pendant/Suspension Mount Kit (Sold Separately)

Phillips

screwdriver

Specification

Model No. UPC Frequency (HZ) Watts (W)

BLP-24-U-P-50-50K-80-D-1

BLP-24-U-P-50-40K-80-D-1

BLP-24-U-P-50-35K-80-D-1

BLP-24-U-P-40-40K-80-D-1

BLP-24-U-P-40-35K-80-D-1

BLP-22-U-P-36-50K-80-D-1

BLP-22-U-P-36-40K-80-D-1

BLP-22-U-P-36-35K-80-D-1

BLP-22-U-P-30-40K-80-D-1

BLP-14-U-P-30-40K-80-D-1

BLP-14-U-P-30-35K-80-D-1

BLP-22-U-P-30-35K-80-D-1

BLP-24-U-P-50-50K-80-D-2

BLP-24-U-P-50-40K-80-D-2

BLP-24-U-P-50-35K-80-D-2

BLP-24-U-P-40-40K-80-D-2

BLP-24-U-P-40-35K-80-D-2

BLP-22-U-P-36-50K-80-D-2

BLP-22-U-P-36-40K-80-D-2

BLP-22-U-P-36-35K-80-D-2

BLP-22-U-P-30-40K-80-D-2

BLP-22-U-P-30-35K-80-D-2

BLP-14-U-P-30-40K-80-D-2

BLP-14-U-P-30-35K-80-D-2

850014987374

850014987367

850014987350

850014987343

850014987336

850014987329

850014987312

850014987305

850014987299

850014987275

850014987268

850014987282

850014987497

850014987480

850014987473

850014987466

850014987459

850014987442

850014987435

850014987428

850014987411

850014987404

850014987398

850014987381

Volts (V)

120V-277V

50/60

Current (mA)

0.6

0.5

0.4

0.35

0.6

0.5

0.4

0.35

Unique Identiﬁer