SDS

ManualsBrandsCommercial Electric ManualsCabinet Lights16 ft. LED White and RGB Tape Light Kit- Under Cabinet Light

1. Scope

This product specification is applicable to lithium-manganese dioxide button

batteries provided by Dongguan Shenneng Battery Technology Co., Ltd.

2. Applicable battery types:

Lithium

-manganese dioxide button battery

3. Battery Type and

Performance

3.1

Model:

CR2032

3.2

Rated voltage:

3.0 V

3.3

Nominal capacity:

10mAh (load: 15.0 k, termination voltage

2.0 V)

3.4

Outline Dimensions:

As shown in the drawing

3.5

Standard Quality:

2.9 g

3.6

Shelf life:

1 year (temperature less

than or equal to

25 ℃ and relative humidity less than 75%).

3.7

Appearance:

Visual inspection shows that the surface of the

battery is smooth, free from damage and

deformation, and the signs are clear.

3.8 Trademark Name:

"Lithium Battery,

In the meantime, it is

necessary to

3.9

Manufacturing date and

identification:

If necessary, the year and month of

manufacture of the battery can be printed on

the surface of the battery.

Example:

21 (manufactured in January 2012)

22 (manufactured in February 2012)

2O (manufactured in October 2012)

2Y (manufactured in November 2012)

2Z (manufactured in December 2012)

The following figure shows the code

spraying pattern on the battery surface:

4;The lithium content: 59 mg

Summary of content (14 pages)

PAGE 1
. Scope This product specification is applicable to lithium-manganese dioxide button batteries provided by Dongguan Shenneng Battery Technology Co., Ltd. 2. Applicable battery types: Lithium-manganese dioxide button battery 3. Battery Type and Performance 3.1 Model: CR2032 3.2 Rated voltage: 3.3 Nominal capacity: 3.0 V 210mAh (load: 15.0 k, termination voltage 2.0 V) 3.4 Outline Dimensions: As shown in the drawing 3.5 Standard Quality: 2.
PAGE 2
4. Main Technical Parameters (Table 1) Project Unit Technical Indicators Nominal Voltage V 3.0 CR series batteries only Nominal capacity MAh 210 Continuous discharge at 15.0 kload Instantaneous short circuit current MA ≥ 300 Time ≤ 0. 5 ' Open Circuit Voltage V 3.25~3.45 All CR Series Batteries Storage temperature ℃ 0~40 All CR Series Batteries Applicable temperature ℃ -20~60 All CR Series Batteries Standard Weight G Approximately 2.
PAGE 3
Table 2 Test Items 1. Outline dimensions 2. Open Circuit Voltage 3. Instantaneous short circuit current 4. Appearance Test Method Test and test with vernier caliper with accuracy not less than 0.02 mm Insulation materials should be pasted on the contact surface of calipers to prevent Short circuit. Use numbers with accuracy not less than 0.25% and internal resistance greater than 1M Quality standard Diameter (mm): 20.0 (0.20) Height (mm): 3.20 (-0.20) 3.25~3.45 V Multimeter.
PAGE 4
1. The above tests have been confirmed by a large number of tests. 2. The company's standard is completely stricter than GB/T8897 "Primary Battery" standard promulgated by the state. 3. If the customer has special requirements, the company can adopt special testing methods according to the customer's requirements. 6.
PAGE 5
Storage test: Under specific conditions, storage has been carried out after 12 months of testing. 7. Discharge characteristics on load Voltage (V) Resistance 15.0 K 3.5 3.0 20 ℃ 2.5 -10 ℃ 60 ℃ 2.0 04008001200 Discharge time (hours) 8. Battery Test 8.1 Temperature and humidity 8.1. 1 Test conditions Unless otherwise specified, the test is generally carried out in an environment with a temperature of 20 ± 2 ℃ and a relative humidity of 65% RH ± 20%. 8.1.
PAGE 6
8.3. 4 Service life After storing at normal temperature (20 ± 5 ℃) for 12 hours, discharge continuously as shown in Table 1 until the termination voltage is 2.
PAGE 7
(Not suitable for this voltage), its service life will meet the requirements of Table 1. 8.3. 5 Leakage resistance inspection Check the leak resistance. Under the condition of no cover, place it at a 40watt fluorescent lamp 1 meter above and 30 cm away from the eyes to observe the smooth and clean surface of the battery without dirt. 9. Quality Assurance (1) If it is confirmed that the product has defects in technology and materials, please replace the product with Dongguan Shenneng Battery Technology Co.
PAGE 8
PAGE 9
第 Of 7 pages, 13 pages
PAGE 10
第 13 of 8 pages
PAGE 11
Usage and safety instructions The battery consists of lithium, organic solvent and other flammable materials. Proper handling of batteries is crucial. Otherwise, the battery may cause deformation, liquid leakage (accidental leakage of liquid), overheating, explosion, fire, personal injury to others or damage to equipment. Please strictly follow the following instructions to avoid accidents.
PAGE 12
In the pool, the soldering iron should not be placed on the battery. When welding, multiple welding should be avoided, because it is equivalent to the pair of The battery is charged or shorted. · Do not use different types of batteries Different types of batteries must be avoided, because batteries produced by different manufacturers, of different types or with new and old combinations can Can cause battery leakage, overheating, explosion, or fire.
PAGE 13
In any case, you should go to the hospital to be treated by medical professionals. · Keep the battery away from flammable liquids If the battery leaks or smells strange smell, immediately keep the battery away from flammable liquid. · Do not touch the battery directly Try to avoid skin touching the battery directly, because this will cause skin injury. Do not overlap and cross-stack batteries (as shown on the right) If so, the battery may deform, leak, overheat, explode or fire.
PAGE 14