Instructions / Assembly

ManualsBrandsCommercial Electric ManualsKitchen3 in. White Recessed LED Baffle Kit

DIMMING

Although this product is compatible with most common residential type dimmers,

dimming performance depends on dimmer, dimmer setting (for dimmers with brightness

range adjustments), wiring method, and the number of LED modules. For best results,

set dimmer position at maximum before adjusting to a lower light level.

Recommended Dimmers (minimum load for four LED modules maybe required for

optimal dimming performance): Leviton Decora – 6631, IPI06, Lutron Skylark – S-

603PGH, and Lutron Diva – DVWCL-153PDH, CTCL-15PDH, and TGCL-153PH.

THREE-YEAR LIMITED WARRANTY

Commercial Electric



warrants this product to be free from defects in material and

workmanship for three years from the original date of purchase by the consumer. This

warranty is limited to the counter replacement at the time of purchase, with the original

purchase receipt. Commercial Electric



will not be liable for the loss or damage of any

kind, incidental or consequential damages of any kind, whether based on warranty

contract or negligence, and arising in connection with the sale, use or repair of the

product claimed to be defective. Some states do not allow the exclusion or limitation of

incidental or consequential damages so the above limitation may not apply to you. This

warranty gives you specific legal rights and you may also have other rights, which vary

from state to state. Misuse, accident, improper installation or maintenance will also void

the warranty.

DRIVER REPLACEMENT

1. DISCONNECT MAIN POWER AT FUSE OR CIRCUIT BREAKER.

2. Pull the RETROFIT TRIM down from the RECESSED HOUSING. Unplug the

FEMALE CONNECTOR of the RETROFIT TRIM from the MALE CONNECTOR of

the SOCKET ADAPTER ASSEMBLY.

3. Separate the LED DRIVER CONNECTOR from the RETROFIT TRIM

CONNECTOR.

4. Remove the SCREWS from the BRACKETS holding the LED DRIVER in place and

separate the OLD LED DRIVER from the RETROFIT TRIM.

5. Replace THE OLD LED DRIVER with the NEW LED DRIVER, securing it in place

using the BRACKETS and SCREWS.

6. Connect the LED DRIVER CONNECTOR to the RETROFIT TRIM CONNECTOR.

7. Re-install the RETROFIT TRIM into the RECESSED HOUSING.

Max Case

Temperature 90°C

Dimmable •

LPS Power Supply

AC INPUT:

120 Vac/ 200mA

60 Hz

AC INPUT

L-BLACK

N-WHITE

Made in China

MODEL: RHPS311AL-JW1

UL FILE E185815

DC OUTPUT:

Regulated current 350 mA

Voltage range 12-21V

Maximum power 7.4 W

Maximum voltage 37 V

+ RED

- BLACK

CDL

REV 03-DEC-2013