Installation Guide

ManualsBrandsCommercial Electric ManualsCeiling Lights4 in. White Recessed LED Trim with 90 CRI, 4000K

WARNING - RISK OF ELECTRIC SHOCK. DISCONNECT

MAIN POWER AT FUSE OR CIRCUIT BREAKER BEFORE

INSTALLING OR SERVICING THE FIXTURE.

LED 4” RETROFIT TRIM INSTALLATION

INSTRUCTIONS - MODEL CER4730M

QUESTIONS? CALL TOLL

FREE 1-800-345-0542

Please read carefully and save these

instructions as you may need them at a later

date.

GENERAL: All electrical connections must be in accordance

with local and National Electrical Code (N.E.C.) standards. If

you are unfamiliar with proper electrical wiring connections

obtain the services of a qualified electrician.

Remove the trim from the box and make sure that no parts are

missing by referencing the PARTS illustrations.

THIS RETROFIT ASSEMBLY IS ACCEPTED AS A

COMPONENT OF A LED LUMINAIRE WHERE THE

SUITABILITY OF THE COMBINATION SHALL BE

DETERMINED BY CSA OR CANADIAN AUTHORITIES

HAVING JURISDICTION.

_________________________________________________

WARNING- RISK OF FIRE OR ELECTRIC

SHOCK

FOR USE WITH INCANDESCENT HOUSING MODELS:

COMMERCIAL ELECTRIC HBR2000B, HBR2000R,

HBR2000BICAT; HALO H99T, H99RT, H99ICT, H99TAT,

H99RTAT, H99ICAT; CORDELIA X2000LICAT, X2000LRICAT,

X2000LICATB; CAPRI R4, RR4; ELCO EL99A, EL99RA,

EL99ICA; JUNO TC1, TC1R; LITHONIA L3, L3R; PROGRESS

P832-TG, P830-TG; THOMAS PS4, PS4-RM; NORA NSCIC-

40IAT; ELITE B4, 4R. HALO LED HOUSINGS – H995ICAT,

H995RICAT.

• Do not alter, relocate, or remove wiring, lampholders, power

supply, or any other electrical component. Installation of

the retrofit assembly requires a person familiar with the

construction and operation of the luminaire’s electrical

system and the hazard involved. If not qualified, do not

attempt installation. Contact a qualified electrician.

• Do not make or alter any open holes in an enclosure of

wiring or electrical components during kit installation.

• To prevent wiring damage or abrasion, do not expose

wiring to edges of sheet metal or other sharp objects.

____________________________

ASSEMBLY AND INSTALLATION

INCANDESCENT HOUSINGS

1. Unscrew the WING NUT inside the CAN to detach the

SOCKET BRACKET from the CAN. Disengage the

SOCKET from the SOCKET BRACKET. (FIG. 1)

2. Thread the SOCKET ADAPTER into the SOCKET. (FIG. 2)

3. Plug the FEMALE CONNECTOR of the RETROFIT TRIM

onto the MALE CONNECTOR of the SOCKET ADAPTER

ASSEMBLY. (FIG. 3)

4. Tuck all wires into the CAN and carefully push the

RETROFIT TRIM into CAN. (NOTE: To provide enough

room in shallow cans, carefully position SOCKET

ADAPTER and SOCKET adjacent to the side of the LED

DRIVER prior to inserting the RETROFIT TRIM into the

CAN.) (FIG. 4)

LED HOUSINGS

1. Plug the FEMALE CONNECTOR of the RETROFIT TRIM

onto the MALE CONNECTOR of the HALO HOUSING.

(FIG. 3)

2. Tuck all wires into the CAN and carefully push the

RETROFIT TRIM into CAN. (FIG. 4)

5 ½ in.

4 in.

PARTS

SOCKET ADAPTER

ASSEMBLY

COMPATIBLE HOUSING

DIMENSIONS

RETROFIT TRIM

FIG. 1

FIG. 3

FIG. 2

FIG. 4

REV 03-DEC-15

Summary of content (6 pages)

PAGE 1
LED 4” RETROFIT TRIM INSTALLATION INSTRUCTIONS - MODEL CER4730M Please read carefully and save these instructions as you may need them at a later date. GENERAL: All electrical connections must be in accordance with local and National Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician. QUESTIONS? CALL TOLL FREE 1-800-345-0542 WARNING - RISK OF ELECTRIC SHOCK.
PAGE 2
________ DIMMING Brand Dimming performance may depend on the dimmer, the dimmer range adjustment setting (for dimmers with brightness range adjustments), the wiring method, and/or the number of LED modules installed onto the dimmer circuit. Ariadni/Toggler C.L Diva C.L Skylark C.L Skylark Contour C.L Lumea C.L For a complete list of compatible dimmers, please look up the item number listed on the cover of this instruction manual at http://www.homedepot.com/. FIXTURE Series Lutron Maestro C.
PAGE 3
INSTRUCCIONES PARA LA INSTALACIÓN DEL ADAPTADOR DECORATIVO LED DE 4” MODELO CER4730M Lea cuidadosamente y guarde estas instrucciones ya que podría necesitarlas más adelante. GENERAL: Todas las conexiones eléctricas deben realizarse conforme a las normas locales y al Código Eléctrico Nacional (N.E.C. por sus siglas en inglés). Si no está familiarizado con las conexiones adecuadas de cableado eléctrico obtenga los servicios de un electricista calificado. ADVERTENCIA: RIESGO DE DESCARGA ELÉCTRICA.
PAGE 4
______________________________ REGULADOR DE INTENSIDAD LUZ Marca Rendimiento de atenuación puede depende del regulador, la configuración de atenuación, rango de ajuste (que los reguladores con ajustes rango de brillo), el método de cableado, y/o el número de módulos LED instalados en el circuito del atenuador. Para una lista completa de reguladores compatibles, por favor vea el manual de instrucciones bajo el modelo que aparece en la primera pagina de este manual en http://www.homedepot.com/.
PAGE 5
MODE D’INSTALLATION POUR GARNITURE DE RÉNOVATION AVEC MODULE DEL DE 10,16 CM MODÈLES CER4730M DES QUESTIONS? APPELEZ SANS FRAIS AU 1-800-345-0542 AVERTISSEMENT – RISQUE DE DÉCHARGE ÉLECTRIQUE. COUPEZ LE COURANT AU NIVEAU DU DISJONCTEUR OU DE LA BOÎTE DE FUSIBLES AVANT D’INSTALLER OU D’EFFECTUER L’ENTRETIEN DU LUMINAIRE. Veuillez lire ces instructions attentivement et les conserver pour pouvoir les consulter au besoin.
PAGE 6
___________________________ GRADATION DE L’INTENSITÉ LUMINEUSE Marque Gradation des performances peut dépend du gradateurs, le réglage du gradateur Plage de réglage (pour les gradateurs avec des ajustements de la plage de luminosité), la méthode de câblage, et / ou le nombre de modules DEL installés sur le circuit de gradateur. Ariadni/Toggler C.L Diva C.L Skylark C.L Skylark Contour C.L Lumea C.L Lutron Maestro C.