Item #1003 939 873 Model #DAWN12-PC-3K-BZ USE AND CARE GUIDE DAWN LED WALLPACK Questions, problems, missing parts? Before returning to the store, call Commercial Electric Customer Service 9 a.m. - 5 p.m., EST, Monday - Friday 1-844-548-3776 HOMEDEPOT.COM THANK YOU We appreciate the trust and confidence you have placed in Commercial Electric through the purchase of this LED wallpack. We strive to continually create quality products designed to enhance your home.
Table of Contents Safety Information......................................................2 Warranty.....................................................................2 Pre-Installation...........................................................3 Preparing for Installation...........................................5 Installation..................................................................5 Operation....................................................................8 Care and Cleaning................
Warranty (continued) LIMITATION OF LIABILITY In no event shall the manufacturer be liable for indirect, consequential, incidental or special damages, or lost profits. The manufacturer is not liable for any claims or damage arising out of or connected with the manufacture, sale, delivery, use, maintenance and repair or modification of the manufacturer products, or supply of any replacement parts that exceed the purchase price of the manufacturer products giving rise to a claim.
Pre-Installation (continued) HARDWARE INCLUDED NOTE: Hardware not shown to actual size. PHOTOCELL COVER AA BB CC Part Description AA #8-32x3/4 in.
Preparing for Installation CAUTION: Do not try to rotate the photocell receptacle on top of the fixture as it may twist the wiring. NOTE: Make sure the photocell is locked on the receptor. Do not over rotate after it is locked. Review this information to ensure a successful installation: □□ Install the light 5–15 ft. above the ground. □□ Do not mount the fixture close to reflective surfaces such as windows, white walls, white surfaces and water.
Installation (continued) 2 Removing the mounting plate NOTE: The mounting plate (D) and mounting plate bolt (C) come pre-assembled on the light fixture (A) for shipping. D □□ Remove the mounting plate (D) from the back of the fixture by loosening the mounting plate bolt (C) using the Allen key (CC). NOTE: Only unscrew the bolt (C) far enough to remove the mounting plate (D). Do not fully remove the bolt (C).
Installation (continued) the electrical 5 Making connections □□ If necessary, strip 3/8 in. of insulation from the junction box or fixture (A) wires. □□ Connect the fixture black wire to the supply black wire ((+) line), and fixture white wire to the supply white wire ((-) common) by twisting the exposed wires together and using the wire nuts (BB). Ensure there are no loose wires.
Operation SELECTING DUSK-TO-DAWN OR SWITCH-ACTIVATED CONTROL Option 1: Dusk-to-Dawn Operation Dusk-to-dawn operation enables the light fixture to automatically turn ON when dark outside and turn OFF when the sun rises, thus saving you energy. □□ To enable dusk-to-dawn operation remove temporary black cover label (DD) from the photocell (B) and confirm that it is unobstructed.
Troubleshooting Problem The light does not turn ON. Possible Cause There is no power to the fixture. The fixture senses daylight. The light cycles ON and OFF continuously. The photocell light sensor is sensing reflected light. The light flickers. The light fixture is wired through a dimmer switch. The light stays ON. The light sensor is in a shaded area. Solution □□ Check if circuit breaker is tripped. □□ Confirm wall switch is ON.
Questions, problems, missing parts? Before returning to the store, call Commercial Electric Customer Service 9 a.m. - 5 p.m., EST, Monday-Friday 1-844-548-3776 HOMEDEPOT.COM Retain this manual for future use.
