Model No. FSXD30-MS-4K-BZ FSXD30-MS-4K-WH USE AND CARE GUIDE FUSION X DUO LED TWIN HEAD FLOOD LIGHT Questions, problems, missing parts? Before returning to the store, call Commercial Electric Customer Service 8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-844-584-3776 HOMEDEPOT.COM THANK YOU We appreciate the trust and confidence you have placed in Commercial Electric through the purchase of this LED flood light.
TABLE OF CONTENTS Table of Contents.......................... Safety Information........................ Pre-Installation.............................. Planning Installation......................... Specifications.................................... Tools Required................................... Package Contents............................ 2 2 3 3 3 3 4 Hardware Included............................ 4 Installation...................................... 5 Operation .......................................
PRE-INSTALLATION PLANNING INSTALLATION Before installing the light fixture, ensure that all parts are present. Compare parts with the Hardware Included and Package Contents sections. If any part is missing or damaged, do not attempt to assemble, install, or operate this light fixture.
PRE-INSTALLATION (CONTINUED) PACKAGE CONTENTS C D E A F B Part A B C D E F Description Quantity Light fixture 2 Control sensor 1 Mounting plate set screw (pre-installed) 1 Mounting plate with gasket (pre-installed) 1 Hanger wire for hands-free installation (pre-installed) 1 Mounting screw cover plug 1 HARDWARE KIT NOTE: Hardware not shown to actual size.
INSTALLATION 1 FOR BEST RESULTS ☐ Install light 8-15 feet above the ground. ☐ Do not mount fixture close to reflective surfaces such as windows, white walls, white surfaces and water. ☐ Do NOT wire to dimming switch. ☐ When mounting fixture, make sure the control sensor orientation is at the bottom for wall mount and away from building for eave mount. ☐ Wall Mount Eave Mount (fig 1). (fig 2). When mounting to a wall, make sure the fixture is 7 in.
INSTALLATION (CONTINUED) 3 ☐ INSTALL THE MOUNTING PLATE Align the holes on the mounting plate bracket (D) with the holes of the junction box. Use two #8 screws (AA) to attach the mounting plate bracket (D) to the junction box AA D 4 MAKE THE ELECTRICAL CONNECTIONS ☐ For wall mount, ensure the control sensor (B) is facing downwards when light fixture (A) is installed. ☐ For eave mount, ensure the control sensor (B) is facing away from the building when light fixture (A) is installed. (fig 8).
INSTALLATION (CONTINUED) THE LIGHT CAULK AROUND THE 5 MOUNT 7 FIXTURE LIGHT FIXTURE ☐ Once wiring is complete, align the mounting screw hole in the center of the fixture with the mounting screw hole in mounting plate bracket (D). ☐ Verify the fixture is flush with the wall and control sensor (B) is pointed downward for wall mount or away from building on eave mount.
OPERATION CONTROL SENSOR OPERATING INSTRUCTIONS The control sensor on this product will turn on the light fixture when it detects motion. The motion sensing can be disabled for Dusk-to-Dawn operation using the built-in photosensor that automatically turns the light fixture on during night and off during daytime. All sensors can be disabled for manual wall switch control.
OPERATION (CONTINUED) ☐ Aiming control sensor for best performance The 180-degree coverage of the motion sensor is measured side to side. Therefore, the sensor will better detect motion across the field of view (side-to-side), rather than motion coming straight at the sensor (in-and-out). Adjust the motion sensor head so that it detects motion moving across the desired area. The position of the sensor head should not exceed 45 degrees from horizontal.
CARE AND CLEANING ☐ appearance, clean the light fixture with clear water and a soft, damp cloth only. ☐ Do not use abrasive cleaners or cleaners that contain alcohol. Do not apply paints, solvents, or any other chemicals on this light fixture. They could cause a premature deterioration of the finish and may void the warranty. ☐ Do not spray the light fixture with a hose or power washer.
5-Year Limited Warranty This is a limited warranty offered by Commercial Electric for a period of five years from the date of purchase to its customers. Commercial Electric warrants to customers that the products will be free from defects in material and workmanship.
Questions, problems, missing parts? Before returning to the store, call Commercial Electric Customer Service 8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-844-584-3776 HOMEDEPOT.COM Retain this manual for future use.