Full Product Manual

ManualsBrandsCommercial Electric ManualsCommercial Lighting750-Watt Equivalent Black LED Industrial High Bay Light

THANK YOU

Round LED High Bay

to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home

improvement needs. Thank you for choosing Commercial Electric!

USE AND CARE GUIDE

ROUND LED HIGH BAY FIXTURE

Questions, problems, missing parts? Before returning to the store,

call Commercial Electric Customer Service

8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday

SKU# 1003 239 951

Model #HL-NHB285-NP08B

Summary of content (6 pages)

PAGE 1
SKU# 1003 239 951 Model #HL-NHB285-NP08B USE AND CARE GUIDE ROUND LED HIGH BAY FIXTURE Questions, problems, missing parts? Before returning to the store, call Commercial Electric Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday THANK YOU Round LED High Bay to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
PAGE 2
Table of Contents Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Electrical Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Pre-Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Tools Required . . . .
PAGE 3
Electrical Ratings Volts (V) Frequency (HZ) Watts (W) Current (mA) Color Temperature (K) Lumen (lm) Life (Hrs) 120-277 50/60 285 3000 5000 30000 Pre-Installation TOOLS REQUIRED Phillips screwdriver Wrench HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
PAGE 4
Connect the electrical wires from the power supply to the LED high bay dimmer. (Figure 3). a knockout. (Figure 5). Figure 3 Figure 4 Rear cover Figure 5 Bottom View Figure 1 0-10V dimmer connection: Connect the two 0-10V dimming wires (Purple+ and gray-) through knockout and connect with compatible 0-10V dimmer (Figure 6). See 0-10v dimming schematic on page 6.
PAGE 5
Installation 6 the hook/boom adapter 5 Attaching to the Fixture □ Lock with screws. □ Install the hook(F)/boom adapter(E) with washer and screw nut. Need to use wrench to lock tight of screw nut. Hook(F) Figure 9 F+H+J Figure 7 7 Boom(E) Figure 10 □ Hook: After hook in the ceiling, please lock the hook with screw. Boom adapter: Lock the boom with screw (J). □ E+H+J ceiling must at least 1.97 in.
PAGE 6
Luminous Intensity Distribution Diagram 0-10V Dimming Schematic Line-Black L Neutral-White N Ground-Green G green gray 0-10 Volt Dimmer (Supplied by others) purple purple L black N white G green Lighting Fixture, 0-10v dimming LED Driver gray WARNING: Refer to Local and National Electrical codes for correctly sizing wire gauge and making the proper electrical connections and stems. If not f local codes.