Item# 1006 456 159 Model #HPDA311CWB USER GUIDE Smart Dimmer with Motion Sensor THANK YOU We appreciate the trust and confidence you have placed in Commercial Electric through the purchase of this Smart Dimmer. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Table of Contents Safety Information FCC Regulation Wireless Protocol Warranty .......................................... 2 ................................................. 3 ............................................ 5 .................................................................. 5 Package Contents Installation Operation .......................................... 5 ............................................................. 7 ...............................................................
Safety Information WARNING: • Not compatible with standard 3-way or 4-way. Do not exceed the load power rating limit of the device. Maximum total wattage rating: Up to 150 total watts for LED and CFL; 500W/120V for Incandescent/Halogen. • This product is to be installed or used in accordance with electrical codes and regulations. If you are unsure of any part of the instructions, consult an electrician. • Save this instruction sheet.
Safety Information (continued) ATTENTION: GRADATEURS COMMANDANT UNE LAMPE A FILAMENT DE TUNGSTENE– AFIN DE REDUIRE LE RISQUE DE SURCHAUFFE ET LA POSSIBILITE D'ENDOMMAGEMENT A D'AUTRES MATERIELS, NE PAS INSTALLER POUR COMMANDER UNE PRISE, UN APPAREIL A MOTEUR, UNE LAMPE FLUORESCENTE OU UN APPAREIL ALIMENTE PAR UN TRANSFORMATEUR. FCC Regulation Supplier’s Declaration of Conformity 47 CFR § 2.1077 Compliance Information Responsible Party Leedarson America, Inc.
FCC Regulation (continued) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Wireless Protocol The Wi-Fi CERTIFIED™ Logo is a certification mark of Wi-Fi Alliance®. Apple and the Apple logos are trademarks of Apple, Inc., registered in the U.S., and other countries. App Store is a service mark of Apple Inc. Google and Google Play logo are trademarks of Google LLC. Warranty 1 YEAR LIMITED WARRANTY This product is guaranteed to be free of defects in materials and workmanship for 1 year from the date of purchase. Guarantee does not include normal wear and tear.
Package Contents (continued) Item# 1006 456 159 Model #HPDA311CWB USER GUIDE Smart Dimmer with Motion Sensor HUBSPACE APP QUICK START GUIDE THANK YOU We appreciate the trust and confidence you have placed in Commercial Electric through the purchase of this Smart Dimmer. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Installation Install the dimmer in a single gang application. 1 Turn power off at the circuit breaker or fuse for the dimmer that you are replacing. OFF 2 3 OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON Remove the old dimmer by disconnecting all wires. Connect the new dimmer wires as follows.
Installation (continued) 4 Mount the dimmer with the screws (C) and attach Wall Plate (B). C B 5 Turn power ON at the circuit breaker or fuse. Installation is complete. Install the dimmer in a multi-gang application. In multi-dimmer installations, the reduction of the dimmer’s capacity may be required. Refer to below chart for maximum load per dimmer.
Installation (continued) Maximum Load Per Dimmer for Multi-gang Load Bulb Single Two-Gang Three-Gang LED/CFL 150W 150W 150W Incandescent/ Halogen 500W 400W 400W NOTE: □ No derating is required for LED or CFL bulb applications. Operation 1 Download the Hubspace™ app from the App Store or the Google Play Store. 2 Create an account to sign in or log in if you already have an account. 3 Connect your dimmer to power and follow the instructions on the app screen.
Operation (continued) 4 Tap the ‘+’ button in the upper right corner to add your dimmer. My Home NOTE: Bluetooth access is required for device setup. Android phones must also enable Location functions to allow for Bluetooth scanning. 5 Scan the QR code on the dimmer or in the Quick Start Guide. HUBSPACE APP QUICK START GUIDE NOTE: If the QR code cannot be scanned, you can enter the code manually. Tap Enter Code and follow the instructions.
Operation (continued) 1) Dim light from 1-100%. 2) Create schedules 3) Control dimmer settings: a) Sensor Mode - set the behavior of the light when you walk in the room and when you leave. b) Grace Period - The amount of time to turn on the dimmer automatically after the movement sensor times out. c) Auto-Off Timeout - Set the duration the light will stay on after motion is no longer detected. d) Other Settings – • Fade On Duration – set the fade time when you turn on the light.
Operation (continued) 7 3) Manual trim setting: Default trim is 20%-100%. The dimming range can be adjusted in the app to different values on a per-device basis. The trim can also be set without the app in the following manner: a) Short presses the “dim-up” and “dim-down” buttons at the same time three times. This enters the configuration mode. b) The LED goes solid green to indicate that it is in configuration mode.
Mode of Operation □ Below are 3 modes of operation available to select via app. Modes Description Light turns on when... Light turns off when… Vacancy (Default mode) Manual turn on, Auto turn off Single press the “Dim-up” button. OR Move around within period of time out. If no motion is detected. OR Single press the “Dimdown” button. Occupancy Auto on, Auto off Walk into the view of the sensor when the light is off and it is dark or after sunset. OR Single press the “Dim-up” button.
Sensing Area Coverage 1 Horizontal field of view: 30 ft 9.1m 3.3 ft 1m 20 ft 6.1m 2 Vertical field of view: 8 ft 2.6m 18 ft 5.5m 6 ft 1.7m 7 ft 2.1m 4 ft 1.2m 20 ft 6.1m -14- 4 ft 1.
Specification Input 120VAC, 60Hz Output 120VAC, 60Hz, Incandescent/Halogen 500W, CFL/LED 150W Maximum load Network Wireless Type 2.4GHz, IEEE 802.11b/g/n Operating Temperature 32° F(0°C)–104° F(40°C) Operating Humidity 5-85% RH, Non-condensing Certification FCC, ETL Troubleshooting Problem What devices can be controlled with the Smart dimmer? Possible cause and action Dimmable function works only with dimmable bulbs.
Troubleshooting (continued) Problem Light or LED indicator do not turn ON. Light is not dimmable, has poor dimming range, flickers, or buzzes. Solution Circuit breaker or fuse has tripped. Load bulb is burned out. Neutral connection of the loading bulb is not wired. Make sure the load bulb is dimmable. For complete details on our bulb compatibility, please look up the item number at www.homedepot.
Troubleshooting (continued) Problem Solution I lost my QR code. How do I add a device? 1. Make sure the device is connected to power. 2. In the Hubspace app, tap +, then Add Device. 3. On the Scan Device screen, tap the Search button in the lower right corner. 4. Follow the instructions on-screen. A device is on another account. How do I transfer it? Scan the QR code and it will transfer to your account. My device is offline for long periods of time.
Questions, problems, missing parts? Before returning to the store, call Hubspace Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-592-5233 HOMEDEPOT.COM/Hubspace Retain this manual for future use.