Item #1002 628 675 Model #JJU3011L/BN Item #1002 628 682 Model #JJU3011L/ORB USE AND CARE GUIDE LED INTERIOR EDGELIT TWINPACK FLUSHMOUNT Questions, problems, missing parts? Before returning to the store, call Commercial Electric Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM THANK YOU We appreciate the trust and confidence you have placed in Commercial Electric through the purchase of these LED edgelit flushmounts.
Table of Contents Hardware Included ...................................... 3 Package Contents ....................................... 4 Installation ..................................................... 5 Maintenance ................................................... 7 Care and Cleaning ........................................... 7 Troubleshooting............................................... 7 Table of Contents ............................................. 2 Safety Information ..........................
Pre-Installation PLANNING INSTALLATION Read all instructions before assembly. Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. NOTE: Keep your receipt and these instructions for proof of purchase.
Pre-installation (continued) PACKAGE CONTENTS Part Description Quantity A Fixture 1 B Hook 1 C Locking Hole 1 D Fixture Ring 1 4
Installation 1 □ □ 2 Connecting the electrical wires Attaching the mounting bracket to the outlet box □ □ Place the mounting bracket (AA) over the outlet box (not included) so that the holes on the mounting bracket (AA) align with the screw holes on the outlet box. Screw the outlet box screws (BB) through the holes on the mounting bracket (AA) into the screw holes on the outlet box. □ □ □ □ 5 Hang the hook (B) onto the mounting bracket (AA).
Installation (continued) 3 □ □ □ 4 Securing the fixture to the ceiling Raise the fixture (A) until it is flush with the ceiling. Align the locking hole (C) with the hole on the mounting bracket (AA). Use your hand to screw the locking screw (EE) into the locking hole (C). □ □ □ □ Securing the fixture ring Hold the fixture ring (D) so that the arrow label on the fixture ring (D) is pointing up.
Maintenance □ Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or removing the fuse from the fuse box. Care and Cleaning □ □ Clean the fixture with a soft, dry cloth. Do not use any cleaners with chemicals, solvents, or harsh abrasives. Troubleshooting Problem Possible Cause Solution The fixture will not light. The power is off. Ensure the power supply is On. The circuit breaker is off. Ensure the circuit breaker is in the On position.
Questions, problems, missing parts? Before returning to the store, call Commercial Electric Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.
Artículo #1002 628 675 Modelo # JJU3011L/BN Artículo #1002 628 682 Modelo # JJU3011L/ORB GUÍA DE USO Y MANTENIMIENTO LED DE BORDE INTERIOR CON PAQUETE DOBLE Y MONTAJE EMPOTRADO Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Commercial Electric de Lunes a Viernes entre 8 a.m. y 7 p.m., El Sábado entre 9 a.m. y 6 p.m., (hora del Este de EE. UU.) 1-877-527-0313 HOMEDEPOT.COM GRACIAS POR TU COMPRA.
Índice Índice .................................................. 10 Información de Seguridad ................. 10 Garantía ............................................. 10 Lo que esta cubierto .................................. 10 Lo que (no) esta cubierto ........................... 10 Pre-instalación ................................... 11 Planificación de la Instalatión .................... 11 Herraminentas Necesarias ......................... 11 Requiere de Hardware ...............................
Pre-instalación PLANIFICACIÓN DE LA INSTALACIÓN Lee todas las instrucciones antes de ensamblar. Antes de comenzar la instalación o de quitar la instalación anterior, desconecte la alimentacion apagando el interruptor del circuito o quitando el fusible en la caja de fusible. Para evitar dañar el artículo, ensámblalo sobre una superficie suave, no abrasiva, como por ejemplo una alfombra o cartón. NOTA: Conserva el recibo y estas Instrucciones como Comprobante de Compra.
Pre-instalación (continuación) CONTENIDO DEL PAQUETE Pieza Descripción Cantidad A Dispositivo de Iluminación 1 B Gancho 1 C Orificio de Bloqueo 1 D Anillo de Iluminación 1 12
Instalación 1 □ □ 2 Coloque el soporte de montaje en la caja de salida Coloque el soporte de montaje (AA) sobre la caja de salida (no incluida) para que los orificios del soporte de montaje (AA) se alineen con los orificios de los tornillos de la caja de salida. Gire los tornillos de la caja de salida (BB) a través de los orificios del soporte de montaje (AA) en los orificios de los tornillos de la caja de salida.
Instalación (continuación) 3 □ □ □ 4 Fije la instalación en el techo Levante el dispositivo de iluminación (A) hasta que quede al ras con el techo. Alinee el orificio de bloqueo (C) con el orificio del soporte de montaje (AA). Utilice su mano para atornillar el tornillo de bloqueo (EE) en el orificio de bloqueo (C). □ □ □ □ Asegure el anillo de iluminación Mantenga el anillo de iluminación (D) de modo que la etiqueta de la flecha en el anillo de iluminación (D) esté apuntando hacia arriba.
Mantenimiento □ Antes de intentar limpiar la pieza, desconéctela o apague el interruptor o remueva el fusible de la caja de fusibles. Mantenimiento y Limpieza □ □ Limpia la lámpara con un paño suave y seco. No uses limpiadores con químicos, solvents, o productos abrasivos. Solución de Problemas Problema Causa Posible Solución El accesorio no iluminará. La electricidad está apagada. Asegúrate de que el suministro de electricidad esté encendido. El cortacircuito está apagado.
Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Commercial Electric de Lunes a Viernes entre 8 a.m. y 7 p.m., El Sábado entre 9 a.m. y 6 p.m., (hora del Este de EE. UU.) 1-877-527-0313 HOMEDEPOT.COM Conserva este manual para referencias futuras.
Article #1002 628 675 Modèle #JJU3011L/BN GUIDE D'UTILISATION ET D'ENTRETIEN Article #1002 628 682 Modèle #JJU3011L/ORB PLAFONNIER ENCASTRÉ D'INTÉRIEUR À BORD ILLUMINÉ À DEL – PAQUET DE DEUX Questions, problèmes, pièces manquantes? Avant de retourner au magasin, veuillez communiquez avec le service à la clientèle Commercial Electric entre 8h00 et 19h00 (HNE) du lundi au vendredi, entre 9h00 et 18h00 (HNE) du samedi 1-877-527-0313 HOMEDEPOT.
Table des Matières Table des Matières......................................... 18 Consignes de Sécurité .................................... 18 Garantie ....................................................... 18 Ce qui est couvert ...................................... 18 Ce qui est couvert (et pas) ......................... 18 Pré-Installation.............................................. 19 Planification de l'installation ..................... 19 Outils Requis .............................................
Pré-Installation PLANIFICATION DE L'INSTALLATION Lisez toutes les instructions avant de procéder à l’assemblage. Avant de commencer à installer ce luminaire ou d’enlever l’ancien luminaire, déconnectez le courant en eteignant le disjoncteur ou en enlevant le fusible correspondent du coffret à fusibles. Pour éviter d’endommager ce produit, assemblez-le sur une surface molle et non abrasive telle qu’un tapis ou un carton. REMARQUE: Conservez le reçu, ainsi que ces instructions, à titre de preuve d’achat.
Pré-Installation (suite) CONTENU DE L'EMBALLAGE Pièce Description Quantité A Luminaire 1 B Crochet 1 C Trou de Blocage 1 D Anneau du Luminaire 1 20
Installation 1 Attachez le support de montage sur la boîte de sortie 2 □ Placez le support de montage (AA) sur la boîte de sortie (non comprise) de sorte que les trous sur le support de montage (AA) s'alignent sur les trous de vis sur la boîte de sortie. Vissez les vis de la boîte de sortie (BB) à travers les trous sur le support de montage (AA) dans les trous de vis sur la boîte de sortie. □ □ □ □ □ □ □ Brancher les fils électriques Accrochez le crochet (B) sur le support de montage (AA).
Installation (suite) 4 3 Installer le luminaire au plafond □ □ □ Élevez le luminaire (A) jusqu'à ce qu'il soit à niveau avec le plafond. Alignez le trou de blocage (C) sur le trou sur le support de montage (AA). Vissez la vis de blocage à la main (EE) dans le trou de blocage (C). □ □ □ □ Fixez l'anneau du luminaire Orientez l'anneau du luminaire (D) de sorte que la flèche présente sur l'anneau du luminaire (D) pointe vers le haut.
Entreien □ Débrancher l’alimentation électrique avant de nettoyer le luminaire en enlevant les fusibles concernés ou en désactivant le disjoncteur. Entretien et Nettoyage □ □ Nettoyez la lampe avec un linge doux, sec. N'utilisez jamais de nettoyant contenant des produits chimiques, des solvants ou des abrasifs. Dépannage Problème Cause possible Solution Le luminaire ne s'allume pas. Le courant est coupé. Assurez-vous que la source de courant électrique est sous tension.
Questions, problèmes, pièces manquantes? Avant de retourner au magasin, veuillez communiquez avec le service à la clientèle Commercial Electric entre 8h00 et 19h00 (HNE) du lundi au vendredi, entre 9h00 et 18h00 (HNE) du samedi 1-877-527-0313 HOMEDEPOT.COM Conservez ce guide pour un usage ultérieur.