Full Product Manual

6
Mounting the TV to the
mounting plate
Holding the TV with the top of the screen tilted
toward the wall, slide the upper notches of the
mounting brackets (B) over the upper lip of the
mounting plate (A).
Tighten the two screws on the bottom of the
mounting brackets (B) as shown to secure the TV.
Loosen the two screws on the bottom of the
mounting brackets (B) as shown.
masonries
masonry.
Installing the mounting plate
(concrete/masonry wall)
Attach the mounting plate (A) to the wall using the
lag bolt washers (BB) and lag bolts (CC).
Insert anchors (AA) into the holes. Ensure the
anchors are completely flush to the concrete
surface even if covered by a layer of joint
compound or other material.
Use the mounting plate (A) as a template to mark
the installation holes. Use a level to ensure the
plate is level.
Use a
1
/
4
in. (6 mm) masonry drill bit to slowly
drill 2.4 in. (60mm) pilot holes.Then use a 3/8
in. (10 mm) masonry drill bit to expand pilot holes.
AA
BB
CC
Installation (continued)
0°
-8°
HEAVY! You will need
assistance with this step.