Manualshelf

Full Product Manual

ManualsBrandsCommercial Electric ManualsElectricalFull Motion Wall Mount for 32 in. to 90 in. TVs
12345678910
Installing the wall mount (concrete/masonry wall)
2
Use the wall mount (A) as a template to mark the installation holes. Use the bubble level (F) to ensure the wall
mount (A) is level.
AA BB CC
Use a
1
/
2
in. (12 mm) masonry drill bit to slowly drill 3.7 in. (95 mm) pilot holes.
Insert anchors (AA) into the holes. Ensure the anchors are completely flush to the concrete surface
even if covered by a layer of joint compound or other material.
Attach the wall mount (A) to the wall using the lag bolts (CC) and lag bolt washers (BB) as shown.
F
Installation (continued)
masonry blocks
masonry block.