Instructions / Assembly

7 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Operation (continued)
2
Completing a resistance
measurement
WARNING: To avoid damage to the meter or equipment
being measured, cut off all power supply to the measured
circuits and discharge all high voltage capacitors before
measuring resistance.
□ Set the switch (B) to the Ω position (1).
□ Connect the black test lead (F) to the common jack (C) and
the red test lead (E) to the positive jack (D).
□ Connect the test leads (E and F) to the circuit being
measured.
□ Read the measured resistance value on the display (A).
3
Completing a diode measurement
WARNING: To avoid damage to the meter or equipment
being measured, cut off all power supply to the measured
circuits and discharge all high voltage capacitors before
measuring diode.
□ Set the switch (B) to the diode position (1).
□ Connect the black test lead (F) to the common jack (C) and
the red test lead (E) to the positive jack (D).
□ Separately connect the black test lead (F) and the red test
lead (E) to the negative pole and positive pole of the
measured diode.
□ The display (A) shows the forward bias value of the
measured diode. If the poles of the test leads are
connected inversely, the meter displays “OL”.
DIGITALMULTIMETER
M
S
8
1
3
2
A
300VCAT
III
1
.
5V
9V
OFF
2K
B
A
C
D
1
F
E
DIGITALMULTIMETER
MS8
132
A
300VCATIII
1.5V
9V
OF
F
2K
B
A
C
D
1
F
E