Installation Guide

C
C
5 6HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
3
Selecting the Correlated Color
Temperature (CCT)
□ Before installation, select your preferred CCT
by moving the switch to either 2700 K, 3000 K,
3500 K, 4000 K, or 5000 K.
Installation Using Spring Clips (continued)
A
A
A
B
A
B
B
B
Installation Using Friction Blades
1
Preparing the LED Downlight
□ Remove the xture (A , B & C) from the packaging.
□ Unscrew the two spring clips and remove them.
□ Install two friction blades (C) onto the xture. For a 5 in.
housing or 6 in. housing, tighten the screws into the
holes using a Phillips screwdriver .
2700K
3000K
3500K
4000K
5000K
2
Preparing the Installation Location
and Compatible Housing
□ Remove the existing trim and bulb from the housing,
revealing the existing socket.
□ Locate the socket in your existing recessed housing
and remove any screws that prevent the socket
bracket from being removed.
Installation Using Spring Clips (continued)
6
Finishing the Installation
□ Squeeze both torsion spring arms together and insert
into the torsion spring slots of the can. Tuck all wires
into the can and carefully push the LED downlight (A)
into the can.
4
Connecting the Socket Adapter
□ Screw the medium base (E26) socket adapter
(B) into the socket in the recessed housing.
5
Connecting the Cables
□ Insert the orange female connector on the LED
downlight (A) into the orange male connector on
the socket adapter (B) screwed into the compatible
housing.
C