Instructions / Assembly
THANK YOU
to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Commercial Electric!
USE AND CARE GUIDE
LED LOW PROFILE EDGE-LIT
TROFFER WITH PRISMATIC LENS
Questions, problems, missing parts? Before returning to the store,
call Commercial Electric Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
1-877-527-0313
HOMEDEPOT.COM
SKU# 1005 399 725
Model #PN324A80A1-40
Ceiling
210*290mm
A side
B side
A side
B side
2
Table of Contents
Table of Contents ................................... 2
Safety Information .................................. 2
Warranty .......................................... 2
Pre-Installation ..................................... 3
Tools Required .................................... 3
Hardware Included ................................. 3
.................................
3
Installation
Specification
......................................
4
Safety Information
For your safety, always remember to:
□ Turn off the power supply at the fuse or circuit breaker box
before you install the fixture.
□ Ground the fixture to avoid potential electric shocks and to
ensure reliable starting.
□ Double-check all connections to be sure they are
tight and correct.
□ Wear rubber soled shoes and work on a sturdy
wooden ladder.
□ Account for small parts and destroy packing material, as these
may be hazardous to children.
WARNING: RISK OF SHOCK. House electric current can
cause painful shock or serious injury unless handled properly.
CAUTION: Turn off the main power at the circuit breaker
before installing the fixture, in order to prevent possible shock.
NOTICE: All electrical connections must be in accordance with local
and National Electrical Code (N.E.C.) standards. If you are unfamiliar
with proper electrical wiring connections obtain the services of a
qualified electrician.
Remove the fixture and the mounting package from the box and make
sure that no parts are missing by referencing the illustrations on the
installation instructions.
FCC STATEMENT
-This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
NOTE 1:This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
NOTE 2: Any changes or modications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Warranty
LIMITED WARRANTY
This product is warranted to be free from defects in workmanship and materials for up to 5 years from date of purchase. If it fails to do so,
please contact the Customer Service Team at 1-877-527-0313 or visit www.HomeDepot.com.
3 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Pre-Installation
Specication
TOOLS REQUIRED HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part Description Quantity
EE Wire Nuts 3
Phillips
screwdriver
EE
Power Drill
4
Recessed Installation
Recessed Installation
1
Remove the LED at panel xture from
the package. Ensure that the power is
turned off before installing the xture.
2
Fold the 4 pieces of T-Gird clips as
picture shows.
3
Place the LED at panel xture into ceiling
and ensure the power supply is off.
4
Fix the at panel xture on the T bar grid
in the ceiling by twisting 4 pcs of T bar
grid clips onto the bar.
5
Remove the cover of junction box on the
back of the xture with a screwdriver.
Remove the knockouts on the A and B
side with a screwdriver.
6
Connect the electrical wires from the
power supply to the LED Flat panel
xture power supply, and 0-10V dimmer.
7
Attach the junction box cover plate
on the LED Flat Panel xture with the
screw using a screw driver. Turn on
the power supply.
□
0-10V dimmer connection：Connect the two 0-10V dimming
wires (purple+ and gray-) through knockout (B side shown as
below) and connect with compatible 0-10V dimmer.
□
Connect the three supply wires (black - hot, white - neutral,
and bare copper - ground) coming from LED Flat panel xture
junction box to the electrical power supply same color
wires through exible conduit and knockout with wire
nuts(EE) (A side shown as below).
Model No. Volts (V) Frequency (Hz) Watts (W)
PN324A80A1-40 120-277V 60 72
Current (mA)
685
Questions, problems, missing parts? Before returning to the store,
call Commercial Electric Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
1-877-527-0313
HOMEDEPOT.COM
Retain this manual for future use.
0-10V Dimming Schematic
WARNING: Refer to Local and National Electrical codes
for correctly sizing wire gauge and making the proper
electrical connections and ground connections to prevent
electrical shock and risk of re. Installation requires
knowledge of luminaires and electrical systems. If not
qualied, do not attempt installation. Contact a qualied
licensed electrician, to ensure wiring is correct and in
compliance of local codes.
gray
0-10 Volt Dimmer
(Supplied by others)
Lighting Fixture,
0-10v dimming LED
Driver
Lighting Fixture,
0-10v dimming LED
Driver
gray
purple
purple
Ground-green
Ground-green
Ground-green
Neutral
N
white
black
gray
purple
N
white
black
Line Black
Red/white
Red
REMARK:
Please reference the dimmers manufacturer wiring diagrams for correct wiring of 0-10 Volt Dimmer.
THIS FIXTURE IS DESIGNED FOR USE IN A CIRCUIT PROTECTED BY
A FUSE OR CIRCUIT BREAKER.THIS PRODUCT MUST BE INSTALLED
BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION
OF THE PRODUCT AND THE HAZARDS INVOLVED, IN ACCORDANCE
WITH THE APPLICABLE INSTALLATION CODE.KEEP THESE
INSTALLATION INSTRUCTIONS.
FCC compliance information is listed as below:
Responsible party: Leedarson America, Inc.
Responsible party address: 300 Technology Court SE Suite 100, Smyrna, GA 30082
Telephone number: (678) 293-8382
ON
OFF
purple
gray
white
Black
Ground