Item #1003 939 871 Model #PWRW50-PC-4K-BZ USE AND CARE GUIDE POWERWALL LED WALLPACK Questions, problems, missing parts? Before returning to the store, call Commercial Electric Customer Service 9 a.m. - 5 p.m., EST, Monday - Friday 1-844-548-3776 HOMEDEPOT.COM THANK YOU We appreciate the trust and confidence you have placed in Commercial Electric through the purchase of this LED wallpack. We strive to continually create quality products designed to enhance your home.
Table of Contents Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Pre-Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Preparing for Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Operation. . . . . . . . . .
Warranty (continued) LIMITATION OF LIABILITY In no event shall the manufacturer be liable for indirect, consequential, incidental or special damages, or lost profits. The manufacturer is not liable for any claims or damage arising out of or connected with the manufacture, sale, delivery, use, maintenance and repair or modification of the manufacturer products, or supply of any replacement parts that exceed the purchase price of the manufacturer products giving rise to a claim.
Pre-Installation (continued) HARDWARE INCLUDED NOTE: Hardware not shown to actual size. AA BB CC Part Description Quantity AA #8-32 x 3/4 in.
Preparing for Installation □□ The fixture can be mounted in the following two ways: Wall Mount □□ Junction Box Mount: Use a junction box to mount the fixture. □□ Surface Conduit Mount: The fixture can also be mounted directly on the wall surface using conduit entry. □□ To ensure proper dusk-to-dawn operation, ensure the photocell is oriented at the top for a wall mount installation, in an area that receives daylight. Do not place too close to reflective surfaces.
Installation (continued) 2 Removing the mounting base D NOTE: The mounting base screws (C) come pre-installed on the light fixture. □□ Loosen the two mounting base screws (C) using a Phillips screwdriver to open the fixture. (Fig. 1) □□ The fixture opens sideways from the mounting base (D) and stays connected on the hinge. (Fig. 2) C CAUTION: DO NOT touch the LED and photocell lens (E) inside the fixture. DO NOT damage or soil the reflector. Fig. 1 D Fig.
Installation (continued) 4 Installing the mounting base Junction Box □□ Route the junction box wires through the large center hole in the mounting base (D). D □□ Align the holes on the mounting base (D) with the holes on your junction box. Use two (2) or four (4) #8 screws (AA), depending on the size of the holes in your junction box, to attach the mounting base (D) to your junction box. (Fig.
Installation (continued) 5 Making the electrical connections BB Junction Box □□ Follow the wiring instructions given below to make the electrical connections. (Fig. 1). Surface Conduit Mount □□ Remove desired conduit plug (B) from one of the fixture’s sides from the where conduit will enter. (Fig. 2) □□ Make wiring connections inside the fixture as per the instructions given below. □□ If necessary, strip 3/8 in. of insulation from junction box or fixture (A) wires (Fig. 1). Fig.
Installation (continued) 6 Mounting the light fixture and caulking □□ Close the fixture by tightening the two mounting base screws (C), using a Phillips screwdriver. □□ Caulk around the mounting base (D) and surface with silicone sealant (not included). D NOTICE: Failure to properly caulk around the surface and mounting base (D) could lead to water damage and is not covered under warranty.
Operation (continued) Option 2: Switch controlled E Switch controlled operation enables the light fixture to turn ON and OFF by flipping a switch that controls the electricity to the outlet powering the fixture. The light fixture will not turn ON and OFF automatically, but is manually controlled. F □□ To enable switch activated operation leave the black cap cover (F) on the photocell (E). Care and Cleaning □□ Shut off the main power supply before cleaning the product.
Questions, problems, missing parts? Before returning to the store, call Commercial Electric Customer Service 9 a.m. - 5 p.m., EST, Monday-Friday 1-844-548-3776 HOMEDEPOT.COM Retain this manual for future use.