Item #1000 028 894 Model #SATIN-L70-120V Item #1000 028 895 Model #SATIN-L105-120V Item #1000 028 897 Model #SATIN-L144-120V Item #1000 028 899 Model #SATIN-A USE AND CARE GUIDE 12 in./18 in./24 in. SATIN LED LINKABLE, DIMMABLE UNDERCABINET LIGHT Questions, problems, missing parts? Before returning to the store, call Commercial Electric Customer Service 8 a.m. - 6 p.m., EST, Monday - Friday 1-877-527-0313 HOMEDEPOT.
Table of Contents Hardware Included ................................ 4 Package Contents ................................. 4 Installation ......................................... 5-6 Operation ............................................... 7 Care and Cleaning................................. 8 Troubleshooting .................................... 8 Table of Contents ..................................2 Safety Information .................................2 Warranty ...........................................
Pre-Installation PLANNING INSTALLATION This LED light fixture comes with one (1) 59 in. power cord with one inline on/off switch per 12 in., 18 in., or 24 in. model. DIMMING Although this product is compatible with most common residential type dimmers, dimming performance depends on dimmer, dimmer setting (for dimmers with brightness range adjustment), wiring method, and the number of LED fixtures. For best result, set dimmer position at maximum before adjusting to a lower light level.
Pre-Installation TOOLS REQUIRED Measuring Tape Phillips screwdriver Pencil HARDWARE INCLUDED NOTE: Hardware not shown to actual size. AA Part BB Description Quantity AA Light Fixture Mounting Clips 2 BB Mounting Clip Screws 2 PACKAGE CONTENTS NOTE: Package contents not shown to scale. A 1 2 3 B C Part Description A 12 in./18 in./24 in. LED Light Fixture B 59 in.
Pre-Installation Additional components are available (sold separately, SKU 1000 028 899 ) for linking and hardwiring. Part 1 2 D 1 2 E 5 Description D 18 in. Jump Cable D1 3 Pin Connector D2 2 Pin Connector E 18 in. Cable for GE Junction Box E1 3 Pin Connector E2 2 Pin GE Junction Box Connector HOMEDEPOT.COM Please contact 1-877-527-0313 for further assistance.
Installation Option A – Plug and Play 1 2 Positioning the LED fixture □ Identify the desired location for the LED fixture and mark clearly. Installing the mounting clips □ Secure each lighting fixture mounting clip (AA) in place with the mounting clip screws (BB). NOTE：Screws must be installed flush with surface. □ Place the light fixture mounting clips (AA) along the desired location and mark their intended position through the holes with a pencil.
Installation Option B – Hardwiring (Hard wired, using a GE Direct Wire Linkable Junction Box, Model # 24772, SKU #494469) 1 2 Positioning the LED fixture □ Identify the desired location for the LED fixture and mark clearly. Installing the mounting clips □ Secure each lighting fixture mounting clip (AA) in place with the mounting clip screws (BB). NOTE：Screws must be installed flush with surface.
Operation 1 2 Turning the fixture on/off Linking multiple fixtures with the direct connector (C) □ Please consult the Planning Installation section for linking specifications. □ Prior to linking, remove the end cap from the 2 pin port of the fixture. (Preinstalled on the fixture.) □ Insert the direct connector (C) into the open end of the first fixture. □ Add the additional fixture onto the direct connector. □ Upon plugging the unit into a power source, the fixture(s) can now be turned on.
Care and Cleaning □ □ Prior to cleaning, first turn off and unplug the system from the power source. To clean the fixture, use a dry or slightly dampened, clean cloth to wipe the exterior of the fixture. Allow the fixture to dry completely before connecting to power and operating. IMPORTANT: Do not use solvents to clean the fixture. Troubleshooting Problem □ The fixture(s) will not turn on. Possible Cause Solution □ The power is turned off. □ Ensure there is power going to the outlet.
Questions, problems, missing parts? Before returning to the store, call Commercial Electric Customer Service 8 a.m.-6 p.m., EST, Monday-Friday 1-877-527-0313 HOMEDEPOT.COM Retain this manual for future use.
1000 028 894 1000 028 895 1000 028 897 1000 028 899
Tabla de contenido Contenido del paquete ........................... 4 Instalación .................................................. 5-6 Operación ....................................................... 8 Cuidado y limpieza ........................................ 9 Resolución de fallas ...................................... 9 Tabla de contenido ........................................ 2 Información de seguridad ............................. 2 Garantía .....................................................
1000 028 899 1000 028 894 1000 028 895 1000 028 897
Pre-instalación HERRAMIENTAS REQUERIDAS Cinta métrica Destornillador Phillips Lápiz HERRAJE INCLUIDO NOTA: No se muestra el herraje en el tamaño real. AA Pieza BB Descripción Cantidad AA Ganchos de montaje de la luminaria 2 BB Tornillos de gancho de montaje 2 CONTENIDO DEL PAQUETE NOTA: El contenido del paquete no se muestra a escala. A 1 2 3 B C Pieza Descripción A Luminaria LED de 12 pulg./18 pulg./24 pulg. B Cable eléctrico de 59 pulg.
1000 028 899
Instalación Opción A – Instalación instantánea 1 Cómo colocar el dispositivo LED 2 □ Identifique la ubicación deseada para el dispositivo LED y márquela con claridad. □ Coloque los ganchos de montaje de la luminaria (AA) a lo largo de la ubicación deseada y marque su posición prevista a través de los agujeros con un lápiz. AA 3 □ □ Instalación de los ganchos de montaje Asegure en su lugar cada gancho de montaje del dispositivo (AA) con los tornillos del gancho de montaje (BB).
Instalación Opción B – Cableado (Cableado, usando una caja de empalmes enlazable GE de cable directo, Modelos # 24772, SKU #494469) 1 Cómo colocar el dispositivo LED □ Identifique la ubicación deseada para el dispositivo LED y márquela con claridad. □ Coloque los ganchos de montaje de la luminaria (AA) a lo largo de la ubicación deseada y marque su posición prevista a través de los agujeros con un lápiz.
1000 028 899
Cuidado y limpieza □ □ Antes de limpiarlo, apague y desconecte el sistema de la fuente de energía. Para limpiar el dispositivo, use un paño limpio y ligeramente humedecido para limpiar el exterior del dispositivo. Deje que el dispositivo seque completemante antes de conectarlo a la energía y operarlo. IMPORTANTE: No use solventes para limpiar el dispositivo. Resolución de fallas Problema □ El(Los) dispositivo(s) no enciende(n). Posible causa □ □ □ □ □ El(Los) dispositivos está(n) destellando.
¿Tiene preguntas, problemas, o faltan piezas? Antes de regresar a la tienda, llame al Servicio a Clientes de Commercial Electric de 8 a.m. a 6 p.m., hora local del Este, de lunes a viernes 1-877-527-0313 HOMEDEPOT.COM Conserve este manual para uso futuro.
