Installation Guide

6
Installation Option A – Plug and Play
1
Positioning the LED fixture
2
Installing the mounting clips
□ Identify the desired location for the LED fixture and
mark clearly.
□ Place the light fixture mounting clips (AA) along the
desired location and mark their intended position
through the holes with a pencil.
□ Secure each lighting fixture mounting clip (AA)
in place with the mounting clip screws (BB).
NOTE： Screws must be installed flush with surface.
3
Installing the light fixture
4
Connecting the power cord
□ To secure the fixture (A) in place, press it up evenly
into the lighting fixture mounting clips (AA).
□ Connect the power cord (B) to the installed
fixture (A) with the 3 pin connector (B1).
IMPORTANT: Do not plug in the power supply unit
to wall power until after connecting to lighting.
5
Connecting to the power supply
□ Connect the power cord (B) to the power outlet using
the clamp-on electrical plug (B3).
A
AA
AA AA
AA
AA
BB
AA
BB
A
AA
B
1
2
3
B
3