Installation Guide

8
Operation
1
Turning the fixture on/off
2
Linking multiple fixtures
with the direct connector (C)
□ Upon plugging the unit into a power source, the
fixture(s) can now be turned on.
□ Use the in-line switch (B2) to turn the fixture(s) on
and off.
NOTE: If multiple fixtures are linked, the first in-line switch
will control all linked fixtures.
□ Please consult the Planning Installation section
for linking specifications.
□ Prior to linking, remove the end cap from the
2 pin port of the fixture. (Preinstalled on the
fixture.)
□ Insert the direct connector (C) into the open
end of the first fixture.
□ Add the additional fixture onto the
direct connector.
CAUTION: Turn off power to the fixture before
attempting to link additional fixtures.
NOTE: The direct connector will only fit into
the ports one way. Do not attempt to force the
connector into the ports.
3
Linking multiple fixtures with
t
he 18 in. jump cable (D) (Sold
s
eparately, SKU1000 028 899 )
B
2
B
21 3
AA C
□ Please consult the Planning Installation section for
linking specifications.
□ Prior to linking, remove the end cap from the 2 pin
port of the fixture. (Preinstalled on fixture.)
□ Use the jump cable (D) to link additional fixtures.
Please consult the image below for matching the 2
pin and 3 pin connectors to their corresponding
ports.
CAUTION: Turn off power to the fixture before
attempting to link additional fixtures.
ELECTRICAL CORD CAN BE ROUTED AROUND
CORNERS TO SUIT THE INSTALLATION
A A B
A
D
1
1
2
2
2 31
D