Installation Guide

9 HOMEDEPOT.COM
.ecnatsissa rehtruf rof 3130-725-778-1 tcatnoc esaelP
Care and Cleaning
□ Prior to cleaning, first turn off and unplug the system from the power source.
□ To clean the fixture, use a dry or slightly dampened, clean cloth to wipe the exterior of the fixture. Allow the
fixture to dry completely before connecting to power and operating.
IMPORTANT: Do not use solvents to clean the fixture.
Troubleshooting
Problem Possible Cause Solution
□ The fixture(s) will not turn
on.
□ The power is turned
off.
□ Ensure there is power going to the outlet.
□ The cables are not
properly connected.
□ Ensure all cables are properly connected.
□ The dimmer Ievel is
too low to start up
the fixture(s).
□ Increase the dimmer level and attempt to
turn on again.
□ The fixture(s) is flashing. □ The dimmer is
not compatible.
□ Remove and/or change to a compatible
dimmer. (Compatible dimmers are listed
in the Planning Installation section of this
manual.)
□ Additional linked fixtures
are not turning on.
□ The direct connector
is not completely
plugged in.
□ The jumper cable is
not completely
plugged in.
□ Ensure all connectors and/or cables
are completely plugged in.