Troubleshooting Guide
TROUBLESHOOTING GUIDE
Symptom Possible Cause(s) Corrective Action
Unit fails
to operate
1. Power cord not plugged into proper
outlet
1. Plug power cord into proper
outlet
2. Blown fuse or open circuit breaker 2. Replace fuse or reset circuit
breaker
3. No power
4. There may be some obstructions
in the fan.
3. Contact power company
4. Check for any obstruction. If you
find an obstruction, turn the fan off.
Unplug the fan and carefully remove
the obstruction. Plug the fan in and
turn it on again.
Troubleshooting is to be performed only by qualified personnel.